-
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
By Honda
- $289.99
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
201 Member Reviews
1 Star: 1
2 Stars: 2
3 Stars: 0
4 Stars: 5
5 Stars: 193
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
09.07.2011
5 Stars
Really easy to install. My 2012 trunk lid already had the locations marked out with dimples that the template lined up with. Will fit comfortable on the back with the Kuryakyn KU7151 Chrome Luggage Rack w/Rubber Inlay. Just take your time drilling the holes, you'll end up drilling three 7/16" holes on the LEFT side and two 7/16" holes on the RIGHT side. Start with a 1/8" pilot hole and increment your way up to 7/16". Includes the necessary wiring harness to wiring it into the brake lights. Works only for brakes - does not function as a turn signal indicator. Installation took about 15 to 20 minutes. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
09.05.2011
5 Stars
After taking up the rear in a 3 bike 12000 mile jaunt through Canada and the US, I saw lots of brake applications and decided that I wanted a light more at eye level. So I went with this trunk spoiler and am glad I did. It looks fantastic and the paint matches perfectly. Great quality and best yet, an easy install. Even though I've successfully added several accessories that required drilling through the body of the Wing I still get apprehensive when I have to permanently modify the Wing and there's no room for error. The templates worked great - held them in place with painter's tape. For those of you with the Kuryakyn trunk rack (with risers), the spoiler fit cleanly under the rack. The LED's are bright and really stand out when the brake is applied. They should provide an extra level of safety. I ordered the spoiler with the 'Clear Lense Trunk Spoiler Run/Brake/Flashing' light (part#EC01320). That item was delayed and I still haven't received it. Will report on that item after I get and install it. But I can say that the spoiler, even stand alone, is a great investment in safety. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
08.17.2011
5 Stars
The spoiler was easy to install - I used directions from various Goldwing forums. I've always wanted this on my other wings! It came fairly quickly even though Wingstuff didn't have it in stock. I used the template just to be sure, but there are actually very little marks on the inside trunk lid that mark where the holes go (3 on the left & only 2 on the right). Use sharp drill bits, search for specific directions, take your time & know what you are going to do before you do it. I installed a Kisan Tailblazer also (also an easy install - almost literally plug-and-play). |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
08.14.2011
5 Stars
Just finished installing the spoiler, nice product. Fairly easy install because the provided template works very well, making drilling the holes (27/64) no biggie. Color match (2008-r303m) was perfect and the finished installation looks quite classy. Took about an hour to install the spoiler and another hour or more to install the running light converter (part BB52734). I'm not much of a mechanic yet the whole procedure went pretty smooth so don't be afraid to jump in and install your own. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
07.09.2011
5 Stars
This spoiler matched perfect easy to install. Wing Stuff went out of there way to get me the spoiler as fast as possible. I will always buy my parts from them, they do what needs to be done to make the customer happy. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
07.03.2011
5 Stars
I purchased this spoiler to take away the "PLAIN" look of the trunk. WOW it looks great! Even the color matched the bike 100%. I also wanted the added safety of the 3rd brake light at eye level. I like the spoiler light to work as intended so I did not add the kit to make the light work as a running light. I feel people will pick up on the light better when nothing is lit and then all of a sudden the light comes on. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
06.18.2011
5 Stars
Had this install by the dealer before I picked up the bike when I bought it. It is very bright, attention getter and looks sharp to boot! |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
06.07.2011
5 Stars
Just installed. Instructions were good. Color match is good. Look is great. It really makes the bike look complete. Drilling the truck lid - apprehension, but the template worked properly. It did take about 4 hours start to finish because the instructions for the light kit I also installed were lacking. All works well now. DON'T overtighten the attachment studs. I can see how cracking of the lid could occure. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
05.29.2011
4 Stars
Bought this product last week. Color slightly off (darker) from my 2008 wing. Color code is correct. May be because my wing is 3 years old. Parked side-by-side with a 2010 Wing the other day, my wing is slightly lighter. Directions are written well. Quality of product is first rate. Lesson learned: Should have bought the spoiler same year I bought my Wing. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
03.19.2011
5 Stars
This item gives the Goldwing a great look. Well worth the purchase. I also purchase the turn signal and break light system also. Fits perfectly with the Kuryakyn trunk cargo rack. I had Wing Stuff install it so I can not speak to that matter. It lights up great and makes the bike more visisble from the rear. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
03.06.2011
2 Stars
I purchased this for my new '09 model on 4/2009. About 18 months (though 28,000 miles) later I started hearing a rattle from the back. The tab for the replacement 4-function lens I had installed had shattered, and the nuts in this spoiler - to hold the lens - had popped out because the plastic around them has also cracked and fallen out - both sides! Too many repeated trunk closings I guess, but now I have to replace the spoiler and lens! Well worth the visibility though. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
02.09.2011
5 Stars
You can't beat the quality. Also love the extra visibility it provides from behind. If you buy this, get the converter cable (BB52734)which adds the running light to the existing brake light funtion. This connection is something that should come with it. |