Contact Us
25 Member Reviews
42
77
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
10.04.2018
5 Stars
| I can show you better than I can tell you, just watch my Youtube video. Here is the link. https://youtu.be/qd6_PB9s6ss |
Was this helpful?
2
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
06.17.2015
5 Stars
| In the past I have always opened and shut my trunk with the luggage rack. Finally I decided to give the trunk handle a try. I ordered this lighted handle, it was a little work to remove the inner trunk liner and get the holes drilled but got er done! Handle looks and works great. I highly recommend this item for added bling and safety. |
Was this helpful?
16
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
01.21.2015
5 Stars
| This Chrome & LED Trunk Handle has been on my bike now for several years, it still looks great and is very solid. I use it all the time to get inside the trunk and have had no issues. The chrome has held up fine and the bright LEDs add some extra brake lighting. More visibility is always a good thing. I would recommend this product! |
Was this helpful?
6
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
07.22.2014
5 Stars
| Great product. Solid handle and very bright brake light. As with everyone else, I was a little hesitant to drill through the trunk the way they described, but all went well. Use masking tape to hold the handle in place while re-installing the trunk lid. Wiring hook up was very easy. The whole process took about an 1 1/2 hour. Very satisfied |
Was this helpful?
2
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
07.22.2014
5 Stars
Was this helpful?
21
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
05.25.2013
5 Stars
|
If you are looking for a trunk handle, look no further! I bought this so I don't 'man handle' the paint to open and close my trunk any more. The directions were good but like others I had a problem with the bolts to attach this. I finally figured out that if you put the top bolts in first and let the rubber gasket slid down a little, while doing so, you can get the bolt started fairly easy. After you get the two top bolts started, slid the gasket back up, pull down on the handle (keeping pressure on it to compress the gasket) and install the lower bolts. I hooked this up to a tail blazer brake modulator, that was already installed with a Honda spoiler. Now I not only have a tail light, but an extra flashing brake light. |
Was this helpful?
2
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
12.11.2012
5 Stars
| The Kury trunk handle is the best looking one offered for sale anywhere! Looks and functionality are the best in my opinion of all the manufacturers! The one thing that concerned me was that so many guys mentioned in their review was the fact the the mounting bolts were just to short and longer ones needed to be purchased to complete the mounting process. Never. Made sense to me that this was the case with this accessory considering that it is so well designed by Kuryakyn. During my install I did notice that the bolts appeared to be a little short, but closer examination revealed the problem that many have experienced. It revolves around the rubber gasket that goes between the handle and paint. You will notice that under the handle a recessed area that the gasket HAS to fit into. It not, the gasket holds the handle up to far for the bolts to reach the threads. One bolt on each side WILL reach the threads, start that one first and tighten it down a turn or two, then carefully with the tip of a small screwdriver carefully work the gasket underneath the handle into the recessed area. Once gasket is in place completely under handle base, give the first bolt an other turn or two and this will compress the gasket enough for you to start the second bolt into the threads. After that just snug up the bolts to seat the handle and you are done!! Give the chrome and paint a quick wipe with a polishing cloth and you will love the finished look! |
Was this helpful?
1
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
10.08.2012
5 Stars
|
Just installed it yesterday. Was kind of skittish, when read had to drill THRU the mounting bosses for the trunk latch assy. It all went well tho. The screws ARE too friggin' short tho. Went to fastenall and got some 1/4" longer. Reattached everything, works/looks good. Sure adds some 'weight' to the trunk tho. Chrome quality is outstanding. |
Was this helpful?
0
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
08.11.2012
5 Stars
| Read other reviews and was hesitant to do the install. But desided instead of using the 7/32 drill, I used a #18 drill bit(.169) as a piolet drill, this will allow the drill to follow the angle of the screw boss. Then followed through with a #9 drill bit(.196)equal to major diameter of the 5-30mm screw. Which by the way is the correct length. Length of install would have been less than 1 hour but....because I dropped a screw down behind the rear glove box and required the help from my wife (to which she helps with most of my installs) it turned out to be a 2 hour duration. As an after thought cover all cavities with a cloth to prevent hardware retrievement. As for the intensity of the light it equils all the other lights on the bike. Therefor would recomend the product for a good looking goldwing upgrade. |
Was this helpful?
0
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
03.03.2012
4 Stars
|
Just installed mine today. Like several others, I fought with it for a couple hours until I finally gave up and went and bought 4 10-32 1 1/4" screws which are just a little longer than the ones that came with it (when I checked the screw that came with it, the 10-32 looked like a better fit than a metric size). I also picked up 4 1 1/2" ones since I wasn't sure if they would work better. The 1 1/2" ones were too long, but they did help me align it up a little easier to get all the screws in the handle. Once I had the longer screws in, and pulled down to lid, I then replaced each screw with the 1 1/4" screw. Had to really pull on the handle on one side since it just seemed to be off a fraction and the screw on one side wouldn't align with it once I had the screws on the other side in. Elongating the holes on the outside of the trunk helped a little to allow the screws to give a little in their alignment. Once I got it on, looks great and very functional in picking up the trunk lid with a fairing and rack mounted on it. Just hope I won't be having to get into the upper part of the trunk lid again for a very long time. Giving it 4 starts just due to the issues of the installation and screw lengths. |
Was this helpful?
0
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
02.09.2012
4 Stars
| As others have said this needs the 35mm screws to fit it properly. as the 30mm screws are just to short. Once on it looks good |
Was this helpful?
0
0
Red LED w/Clear Lense Chrome Trunk Handle
ITEM CODE: KU3215, SKU: KU3215
09.23.2011
5 Stars
|
I put this on my 2012 as well. It's easy to install, and requires you to drill five holes. If you aren't comfortable doing that, have a dealer or friend help. Start out by removing the 18 or so screws that hold the inner trunk lid in place, remove the harness from the opener unit. With a drill bit (recommended size found in the instructions), drill through the trunk latch screw holes. Drill a fifth hole between the two holes on the right side for the wiring. Do this from the inside between the two bosses. Don't blindly drill from the outside. Insert wire through the gasket and the middle hole you drilled and plug the wire into harness (the white one, not the blue or red) Reassemble the inner trunk lid. Remember to reattach the plug on the opener unit. Leave out the four screws that originally held in the latches in place. Place the other rubber gasket on the left and start with the inner screws first. The two outer screws seem to come in a bit short until the handle is tightened a bit...but it all works out in the end. Looks nice with the OEM spoiler and if you have a brake modulator, it'll function on that too. |
Was this helpful?