Contact Us
| The saddlebad accents look great and add a lot of bring however...the truck accents come up about 1/4" higher than the top of the tail lights on my 2008 GL1800 and actually rubbed on the trunk lid. The right side accent chipped a small piece out of the gelcoat on my trunk lid before I noticed the problem. Leaving the accents on any longer would have really done some damage to the trunk lid. The lead mechanic at Wingstuff looked at them and agreed, it is a fittent defect as they were mounted correctly. As always, Wingstuff gave me credit on the trunk accents with no questions asked. I replaced them with the Kuryakyn accent that just runs along the bottom of the tail light. Not an exact match to the saddle bad accents but the combination looks great all the same. Randy |
| Looks good once mounted, but there are no instructions, or template. The Inner cover on the trunk must be removed! The screws are too short to mount the rack and use the rubber washer on both sides of the trunk. I had to leave out the inside rubber washers in order to make the screws fit. Spend the money and get a "Name Brand", or OEM unit. It will save you a lot of headaches! |
| Great Instructions and Templates. It took about 1/2 hour to put on and looks Great! I am very pleased with this item. I also added the Kizan Tail Blaxer to the spoiler, so it also works as a Strobing Brake light. |
| These are the first accessories I put on my new Pearl White 1800-what a difference they make keeping the cold off my hands and the "little lady" in the back says she feels less wind also.If you don't have them,give them a try-you won't be sorrow |
| These Wings are a necessary evil for trike owners. I say that because they do a desirable job, and yet are kind of weird looking hanging out there so far. I was a little uncomfortable mounting a rather large wing with only 2 closely configured mounting points available. Once mine were in place, according to the installation instructions, I noticed that they slid a bit up and down on the crash bar. Instead of using the factory supplied thin rubber bumpers I mounted clear silicon bumpers 1/8" thick to the bodywork and the valve cover. I also placed a pad between the crash bar and the plexi panel where Baker drills a hole for "production only". The result of mounting my 3 pads per side reduced the movement of the panel significantly and eliminated any chance for it to rub against the valve cover or paint work. Now I am going to put some miles on these things and will report back on their long term performance later. |
| Well...I just mounted these Hand Wings the other day and had to do some tweaking to avoid a future paint scratching problem. The rubber pads provided in the kit to protect the paint are not ideal for this purpose since they are too thin. So, I edged the body side of the plexi panel with a 3" strip of black door edge molding and installed a small, round, clear, 1/8" thick, silicon pad on the bodywork. No more worries...ever! I'll post again later about the longer term performance of these Wings as I begin to put more miles on them. |
| It's almost to big for the rack but it will work if you don't put heavy things in it. Might break your lid on the goldwing if you fill it full. The bag is made good for the money. |
| It took me almost 2 hours to install because I had to run A tap down the threads and you need to use A 5/16" drill bit. It's A good rack for the money just takes time to install it right. |
| I thought this shield would be better for protection, but it is not. It should have a little flip at the top to help with the wind. I am not happy at all with this shield as it does not have anymore wind protection than stock. I would not reccomend this shield. |
| Bought one of these windshields and it was fine until a truck going the other way on a two lane road threw up some small rocks and the windshield not only cracked, but it took a chunk out of the windshield on the top left hand corner. I have been riding for years and have never seen anything like this. Also, I showed two different Honda Motorcycle dealerships the busted shield and they had never seen anything like it. I called Memphis Shades and they told me too bad and that it was road hazard and they would not do anything about it, nothing at all, therefore, I am not going to ever buy a Memphis Shade again and I hope you don't either. |
| Good shirt with a good price! |
| Good shirt with a good price! |