Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

ITEM: PG33394

02.25.2012
Received this shirt and was highly disappointed. It was the smallest 2XL I have ever tried on. The material is so thin you can literally see through it. This is basically the cheapest cotton t-shirt you could possibly find with genuine Honda Graphics on it. I will be sending it back pronto!!!!!!
Was this helpful?

Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029

02.24.2012
Update: When I saw Kenneth's review I realised that I forgot to mention in my previous review about the template being wrong (seems to be too far forward on the right). I also omitted the exact steps I took to fit it correctly as I was preparing for a long trip and didn’t have the time, so I will give that feedback now.

As with any other accessory that requires drilling, you should always measure more than once to make 100% sure it is fitted correctly. I followed the next few simple steps to ensure it was mounted correctly:

1. I used the template to mark the holes.
2. I drilled only one hole on the left that is just big enough for the screw to fit. I chose the one closest to the back of the bike.
3. I screwed in all of the screws into the spoiler except for the one I drilled the hole for.
4. I taped masking tape on top of the lid approx where the rest of the holes should go.
5. Using a longer screw through the drilled hole, I mounted the spoiler, being careful not to let the spoiler slip and damage the paint. Only hand-tight.
6. I closed the lid (do this slowly) and carefully moved the spoiler until it was positioned correctly (I used a measuring tape to make sure it is the same distance from the pillion backrest on both sides).
7. With a felt-tipped pen I marked the position of the screw heads on the masking tape and carefully removed the spoiler.
9. Once removed I marked the centre of each screw position and drilled a small hole for each screw.
10. I refitted the spoiler using the one long screw.
11. With my wife’s help I held the spoiler firmly in place and slowly lifted the lid. Make sure it doesn’t slip or it will damage the lid!
12. I used a small screwdriver to insert into one of the holes on the right to help keeping the spoiler in place. I chose the one diagonally across from the one with the long screw fitted.
12. By looking through each of the holes in turn, I was able to determine if the holes were properly aligned with the spoiler, and if not, I could see in which direction to enlarge each hole. You can carefully move the spoiler up and down if you want to get a feeling of what needs to be done.
13. I started with the hole where I inserted the screwdriver and made the hole just large enough to fit another long screw through.
14. Now with 2 screws in place to hold the spoiler, I once again closed the lid and measured the distances again, taking note of any adjustments needed.
15. Once I had the 2 holes aligned perfectly, I continued with the rest, making small adjustments at a time until the holes were perfectly aligned and slightly bigger than the screws to allow for final alignment.
16. At this point I peeled off the masking tape, and drilled the hole for the wires according to the template marking.
17. For final fitment I screwed in all screws (hand tight), closed the lid, measured the distances from the sides and front and moved the spoiler until it was perfect. Then holding it firm while opening the lid (again, my wife helped) I tightened all screws.
18. A final measure confirmed that it was perfect.

Plugging-in the wires was merely a formality.

Job done!
Was this helpful?

ITEM: BB52637

02.23.2012
I have no problem with this back rest it does the job for me. I had one on my 1500 and got another when I got my 1800.
Was this helpful?

ITEM: KU7316

02.23.2012
These lights add some good looks to the bike -- especially at night. With all of the lights on the front and back of a Goldwing, there's not much light on the sides. This adds some great visibility. I also like the fact that they blink with the turn signals. As always, good product from Kuryakyn and good service from WingStuff.
Was this helpful?

Kuryakyn Passenger Transformer Floorboards for GL1800
ITEM CODE: KU7006,   SKU: KU7006

02.23.2012
Anyone have info on the NHTSA recall?
Was this helpful?

ITEM: PG03659

02.23.2012
Got both the saddlebag and trunk trim. The trunk installation was really a piece of cake -- provided you watch the video and follow the instructions. The saddlebag installation was a little more involved, but still no real problem -- again, watch the video and follow the instructions. I've always found Kuryakyn products to be well made and accompanied by thorough instructions.
Was this helpful?

Comfort Grip Covers
ITEM CODE: TR179222,   SKU: TR179222

02.23.2012
Got the new grips within about three days. After reading the other reviews, I was skeptical about using the hairspray like the directions said, but I didn't have any silicone spray; so I decided to do what the directions said. The hairspray worked very well. You just have to use plenty and get the grips on in a hurry.

They feel like they're going to make a big difference to the stock Goldwing grips. I can't wait to try them out for a few hundred miles.
Was this helpful?

ITEM: WS187416

02.22.2012
if you own a gold wing you better be ordering one these babies right now im a much younger guy 41yrs who just stepped off a 2009 cbr 1000 i ride my wing like a over size sport bike an always end up running over stuff in these chicago street great,great product an a must have i needed it thanks guys for reading my review....
Was this helpful?

Centramatic Stainless Wheel Balancers for GL1800
ITEM CODE: CTMGW100-102,   SKU: CTMGW100-102

02.22.2012
i have not ever riden on a set of these before but being a fairly new gold wing owner i put on a set because of what everybody is swearing too my tires are the dunlop elite 3 that everybody swears by i will be the judge an jury of how these things perform i will be back in the future with more reviews...
Was this helpful?

ITEM: HO08R80MCA100J

02.22.2012
Was going to get a different one but they were out of that one's that I wanted so I got this one instead and I'm glad I did, I'm 6'2" and I sit high in my seat so this one works great for me and the air flow goes right over me. Thank you
Was this helpful?

Chrome Lower Front Cowl for GL1800
ITEM CODE: BB52608,   SKU: BB52608

02.22.2012
Put it on and it looks great, took a little while to put it on but that's no fault of the product, it's the set up that's off. All in all it's a great product that looks great on my bike, now I will have to get the more chrome to go along with it lol.
Was this helpful?

ITEM: KU7316

02.21.2012
PRETTY NICE ITEM, RECIEVED AT THE FIRST OF THE MOS-PUT IT ON TODAY- WHEN IT FINALLY GOT WARM ENOUGH TO DO SO-I NOTICE THERE IS AN OFF SET PLACEMENT ON EACH SIDE OF MY O8 BIKE/TRIKE-I WAS SURPRISE TO SEE THIS- SO MAKE SURE YOU CENTER THIS ACCENT II ITEM- LOOOKS GREAT FANTASTIC-REALLY ADDS TO THE DECOR-SO GO GET SOME--YOU'LL BE IMPRESSED !!!!!!!!! NOW LETS RIDE ??
Was this helpful?

29813 Reviews Found

| 1451 |