Contact Us
| covered up the scratches on the bike and that is what I was after. Bonus is that they look Great as well. Do lots of measuring to get them even on both side but can be done if you take your time. |
|
This is my second one (first one on an '08)and I had some issues on the first. This one however, was a total pain. It ended up taking about 3 1/2 hours. At the end of my frustration, I did find a simple solution. Take a crescent wrench and bend the bottom tab on the side braces, backwards (to the back of the bike) which will allow the front of the bracket to raise up to the bolt under the floor boards. This seems to be the biggest cause of things having to be pried or forced into place. It seems these tabs are welded on at just a little bit of the wrong angle, which throws everything out of whack. |
| Man what a difference it makes to my front fender, it matches the air intake accent perfectly. The instruction says the product mey need to be tweaked to fit, I found that not the case. If the product don't fit try it on the otherside which is what I did and they both fit fine. It took longer to clean the area than the install. |
| This was a replacement to the one in my helmet. Earlier it was noted by a person about the solder pad and the wires breaking there. That happened to my original set but with a N104 helment the other options are outrageous priced. I was incredibly happy to see the new one has that issue resolved and the improvement is great. Love to have the headset working as designed again. |
| I ended up thinking I was just saving money and getting the "cheap" one. It came in today, I installed the vent sitting at my desk and couldn't wait to leave work to install it. Installed on teh bike tonight and what a differance. Very happy with my selection. |
| Way overpriced, lower the price and watch them sell! |
| My front forks on my 96 GL1500SE were leaking and I knew that it was going to be a big job to fix it. I was originally going to buy racetech emulators but the installation seemed overwhelming and my local shop wanted a fortune to do the job. I installed these springs, new fork seals (kit from wingstuff) and it transformed my bike. No more front end dives during braking and more responsive. I used 10 weight fork oil and added no air to the shocks and they are perfect for me (250 pound guy). I never did a job like this before but I followed the tutorial on Steve Saunders forum and completed the job without any snags. I found compressing the springs to be easy, I did it myself and just marked where the thread began on the fork. Great upgrade-this fixed the one issue I had with the bike-I will keep this bike forever! |
| Ordering one of these gave me the perfect amount to complete my fork seal replacement/spring upgrade. The oil is blue in color which is nice in the future, if I find some oil on my bike I will know if it is a fork issue due to the blue color. |
| This was my first time changing fork seals and this kit made it easy, it included parts that I normally wouldn't think about ordering (washers and bolts) but needed to be replaced. Please check the kit when you receive it-mine was picked wrong and required me to call customer service. Tom at customer service was very helpful and got me the part I needed right away to finish the job. |
| I was hesitant to order this windshield since the price was so reasonable. I took a chance since wingstuff has great return poliices. I like this better than the stock windshield; it is a bit larger so I don't have to raise it up (always slid down on my 1996 SE after a few miles). Mounting took me about 40 minutes and I only needed a philips head screwdriver. Put the vent on before you mount the windshield and it will be a breeze. |
| I don't understand all the complaining about the install instructions. Yes you have to remove some parts to install this. What did you expect?? I had this hitch for 6 years on my '07 wing and now it's on my '12. Great hitch and reasonably priced |
| I replace the stock short Audio Extension on my 2012 Wing. Installation was very easy, even though no instruction were included. But if you've done anything on that left side faring you know where this connection goes. And the added length is much needed. The only issue I had was the rubber plug that holds it in place. There was no way to get that Audio "L" through that small hole so I ended up using my Dremel tool slicing it length wise and sliding the old one out and new one back in. Then I used some crazy glue to seal the slit back up and reinstalled and works like it should. Get this if you need or want the extra length it's well worth it! |