-
Wig Wag Brake Modulator
By Back Off SKU: PU20500031
- $44.99Save $2.96
MSRP: $47.95
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
71 Member Reviews
1 Star: 7
2 Stars: 0
3 Stars: 5
4 Stars: 12
5 Stars: 47
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
04.03.2011
5 Stars
A great safety device for every Goldwing rider! Easy to install and it works great! |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
02.27.2011
4 Stars
Great feature, instructions are horrible. Should be more explicit when involving cutting, splicing or tapping the electrical system |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
11.21.2010
5 Stars
This is a great little device, I installed inline with only the break lights on the trunk. These are the only two that flash and really looks great. I have so many lights installed that are tied to the break system, this unit would not have handled them all. (this is the reason for making the ones on the trunk flash only) Looks good, gets lots of attention. |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
11.15.2010
5 Stars
Looks great and adds much needed awareness to oncoming drivers. Had this installed at the shop in about a hour. |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
09.13.2010
1 Stars
Had two defective units, comfirmed by SD. Both were replaced |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
08.21.2010
4 Stars
I'm giving Wig-Wag Brake Modulator only 4 Stars, primarily because the maunufacture Signal Dynamics Corp (SDC) instructions were horrible at best. I wrote SDC after reading their Sales Rep review, who stated back in 2009 SDC was writing installation instructions for Goldwings. Sad to report, but just another pretty face telling us what we want to hear. Needless to say SDC did not write instructions, however my fellow GL1800 riders group web page did add in their "Step-by-step" section instructions and your reviewers notes, won the day and I was able to install the "Wig-Wag" in about three hours. Again Wing Stuff was quick on the delivery and great customer service. Too bad SDC hasn't taken a page from your play book! Take care and thank you for the great products at a fair price! |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
06.24.2010
3 Stars
OK,I'M THIS ITEM 31/2 STARS-GOOD PRODUCT-SAFETY ITEM-INTRUCT AS I'VE SAID BEFORE WAS VAGUE INDEED, I HAD TO HAVE THIS ITEM FOR SAFETY SAKE & MY SAKE AS WELL-I GOT BACK WITH MY SHOP & WE TALKED & THEY DID THE INSTALL TWICE THE FIRST MODULATOR DID NOT WORK SO I DID AS I SAID EARLIER I SENT IT BACK, ONLY IT WAS FOR ANOTHER,2ND DAY AIR TO GET IT HERE QUIT & THANKS TO WINGSTUFF IT DID COME THE 2ND DAY-WELL THIS ONE DID WORK,THE 4 VERY QUICK FLASHES & THE 3 SHORT FLSAHES,-WELL I GUESS ANY DISRUPTION IN THE BRAKES ON THE REAR HELPS, BUT I DO WISH THE FLASHES WERE A LITTLE SLOWER ESPECIALLY THE FIRST 4 SUPER FAST FLASHES, YOU CAN BARELY SEE THEM ????- STILL IT IS A SAFETY FEATURE, SO HERE IS THE 31/2 STAR RATING- GOOD PRODUCT SAFETY WISE ANYWAY. HOPE THIS HELPS YOU OTHER BUYERS OUT SOME. |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
06.14.2010
4 Stars
Very easy install IF...THROW AWAY THE INSTALL INSTRUCTIONS! Simply enter through the TRUNK! Remove BOTH rear lights. Remove the center cover for the trunk lid and side lid opening mechanisms (center of trunk just inside...has 3 screws holding plastic cover). Drill 1 (one) hole large enough for a wire to run from the bulb compartment into the lid opening mechanism area. Drill one larger hole in the plastic cover of the mechanism cover. Mount the Wig Wag on the outside of this cover and feed the 5 wires through the larger hole into the lid opening mechanism area! Now Feed the black (grounf wire) to the CB or radio ground. Take the red wire (hot) to the green/red wire on the Goldwings rear lights (either side will do fine) clip this wire. Connect the red wire from the Wig Wag to the wire that runs back to the FRONT of the motorcycle (keeping this simple) connect either the white/red OR the red/white from the Wig Wag to the end to the light bulb! NOW, this is the scary part!! On the remainder of the bulbs...CLIP the SAME bulb wire (the green/red bulb wire and connect the Wig Wag wires in sync! If you connected the red/white Wig Wag wire to one of the right bulbs then you will connect the red/white wire to the other! Then on the left side, connect the two left bulbs to the white/red wire from the Wig Wag! The wires on each of the other 3 bulbs should be tied off and NOT used as the power is coming from the first bulb connection! The orange wire is not used. THIS PROCESS IS USED IF USING THE FIRST METHOD ONLY! Now use duct tape and NEATLY tape the excess wires to the back of the middle cover and reattach. It will not interferre with anything if done properly! A POINT ... I would not use clips to tie the wires together. I used old fashioned twist, solder and wrap with electricians tape. I hope this helps. With this method...the rear lights flash back and forth as noted!!! |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
06.12.2010
3 Stars
well- got this item the other day- read all the reviews, & thought surely i could do this, but i do have a trike & the wires have shifted around so i called my shop & they said maybe ???? so i return this item ????????? yea it was like spagetti under there. lol-i've install about 20 something or more items on my trike even a groung effects kit, but this item as they've said is very vague in there instruct.so i;ll try the front mod. |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
05.03.2010
5 Stars
This works great on the back of my Trike. It commands the attention of other drivers. Just one more safety feature that's worth the price. |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
03.09.2010
4 Stars
I would have given this a 5 star but the instructions are vague at best especially when it has to do with the Goldwing wiring. I simply removed the seat and interceded the green/red stripe wire coming out of the relay switch and same for the ground wire; hook up the wires for the four/three then continuous on sequence. I only used one of the white/red or red/white wire and all the stop lights worked and the modular can be placed beneath the relay box. I did soldered all connections and used shrink wrap. This was the simple less way to go without pulling rear tire cover or trunk lower cover and so on. If you are wanting each side to work opposite from the other, you will need to go searching for a different location and a lot more time. The Wig Wag does exactly what they said it will do, it does get the attention of the other drivers that are behind you. |
Wig Wag Brake Modulator
ITEM CODE: PU20500031, SKU: PU20500031
11.27.2009
5 Stars
Safety, Safety, Safety, You can be seen from a good distence, putting it on my trunk lights it showes up over my trailor. I have had people role down there windows and remark about the Christmass tree I drive down the street, I do have lots of lights. |