Very pleased once they were installed. The chrome is nicer than the flat silver of my old passenger boards. As others have reported it is annoying to have to take pieces from the old boards. |
Ordered 1st pair and had a problem with one side. Got an RGA from Wingstuff and 2nd pair was sent with no problems. They look great and give passsenger another position to choose from. Install was quick & easy. |
Okay...this is what I think of these floorboards; they add a nice look to the bike, folded up or down... and, they are very comfy for the wife, extended or not. What I did not like was the quality of the plating and the fact that I had to pirate parts from my old floorboards to make these work. Also, all the hardware was loose! I had to remove, locktite and reassemble all the hardware...all of it! The chrome is hazy in some areas and yellow in other areas. What gives with that? Kuryakyn can definitely do better here. Last note; I had to add a couple of washers behind each mounting bolt to space the floorboards out from the frame otherwise the back corner, near the hinge, would hit the backing shield every time I raised them. Overall, I decided to keep them, but just barely. |
Wow...nice covers, and packaged very well! These really take the profile of your bike and give it da bling. Installation was easy...but...you need to lift the shelter to seat the double sided tape(?????). I would think most folks that buy this item don't stick the tape and just use the 3 mounting screws to hold the panel in place since the top section slides under, and is held by the shelter anyways. Either way you mount it, it will look great when you are done...just don't look down at it when you are riding. |
I received these boots about a month ago and I am very impressed. They are more rugged then I thought but very comfortable. I would buy them again. I find that it is easier to shift my Goldwing with these boots then my previous pair. The only issue I had was that they were difficult to get them on and off until they got broken in. A great pick. |
This is a very nice addition! |
Nice! Leaving for Utah, Wyoming and Montana end of month. This is peace of mind, along with a plug set . . . |
Very nice! I wish WingStuff would offer additional crush washers, or sell seperately. |
One of the easiest installs I've completed so far. Adds a great finished look to an already outstanding looking ride. |
Look great on the bike. No problems with the finish. Another good product from Kuryakyn. |
Fit my 08 like a glove. No hammering, bending or drilling required.Didn't have remove half the stuff as mentioned in the directions.The shaft of a large # 10 Phillips screwdriver was a perfect pry bar to line up the last two bolts on the "H" shaped hitch mount.Can't waut to try out in 2 weeks going to Wing Ding M. Allen |
Don't hesitate - this is the backrest to buy. Install was easy with aid of the video. This should be standard equipment on a Goldwing. |