Contact Us
| Easy to install super bright, helps a lot during night rides and you are well seeing |
| As far as the product I give it a five, perfect fit, easy to install and great looks. I give it a 5 as this is a direct ship from the manufacture product. I ordered in in plenty of time (I thought as they showed to be IN STOCK) for a trip. 2 weeks later I finally got notice it was shipped and 5 days later I received it. No need to say - It didn't make the 40 degree weather trip. SO if you are in no hurry to get it - It's a great buy! |
| I had ordered the Show Chrome Tridium fog lights that, though marked correctly on the box, included the wrong fog light switch for my 2013 F6B. Bud was super helpful through chat and on the phone as we discovered the wrong part was included. This was the part I needed and once it arrived, it was a quick plug-n-play, perfect fit. |
| This was a very easy install. As low as the F6B sits already, plus its short suspension, I was very concerned about bottoming out, especially in my driveway entrance. This not only looks great in black with my red and black F6B, but I feel much better about the protection of my undercarriage. |
| I've had at least 6 BMW motorcycles, all with stock grip heat. That allowed me to ride year-round here in the Southeastern US. I've had two Goldwings, and now an F6B, with no heated grips. It makes a HUGE difference in how cold you can ride. It's been in the low 30s every morning for weeks now and I haven't missed a day thanks in part to these grips (and proper gear elsewhere of course). They work just as well as any of my Beemer's stock grips. Just a note or two on install. 1. Be sure to splice into your handgrip wire harnesses low enough and as far into the nose of the bike as possible. I did mine a little too close to the left grip and the finished product didn't tuck back into the left bar's wire channel quite as neatly as stock. 2. On the glue...DO NOT put the glue on the handlebar first, then slide the grip on. That just pushes most of the glue up to the switchgear, can be ugly, or worse, glue your throttle side to immoveable. INSTEAD, put a decent-sized ring of glue on the inside of the new grip, then slide it on, twisting back and forth as you go. That ensures better coverage and less overage.3. Be sure to position your grips properly so the left grip's cabling doesn't interfere with clutch movement and the right grip has plenty of slack to turn full throttle. |
| Chrome always looks better and this one seems much beefier than the OEM kickstand. |
| These just set off the back of the bike and look GREAT! |
| We had these on our old bike and we had to put them on our new one. They are GREAT for diverting cold air during a chilly day and excellent on giving more air on a hot day! |
| Best tires there are for a Goldwing... I never run anything else... great price from Wingstuff! |
| Nice looking, integrate well with bike. Some people use balancing beads instead, because they are cheaper. However, you can’t use their injector bottle with TPMS valves, so you have to put the beads directly into the tire. Centramatics is one install and you’re done. |
| The install was very easy, they are a great addition to the Bike. Only wish that I’d bought them earlier |
