

| Mounted as described, GPS is now in a easy to see user friendly location. Also nice that RAM offers additional accessories. |
| Easy to use, this is a must for your garage. |
| I received the trunk lid about five weeks after I ordered it. The color was beautiful and the finish was very good. I mounted the luggage rack taken off of the old trunk lid. I agree it’s a little disconcerting drilling into such an expensive piece but it worked out well. Surprise there is no provision for the high mounted stop light or sequential turn signal stoplight. you need to drill another hole for the wiring from the stop light. I drilled directly into the channel that the internal trunk light wires run through and was able to fish its cable along with the internal trunk lights After opening the channel up inside the cover. I’m happy with the way it worked out. After installing this don’t be surprised with all the leftover hardware as there is no internal liner to the trunk lid like there is from the factory. Would like to see someway of fastening the leading edges of the passenger back rest to the trunk lid as there is a slight gap under the edges. The trunk lid is solid and doesn’t rattle or make any squeaks while riding. Although the cover adds about an inch and a half of extra headspace, I still can’t get too full face helmet inside the bag. I have a Shoei Neotech 2 in a XXL and it takes up more than half the trunk. wish my trunk was as big as the 2021s. All in all a well-designed peace from Corbin. |
| I am glad I purchased the Kuyraken hitch. The directions were easy, the build quality was solid, the base plate makes it better than the other hitches that only cost $200. I plan to use it for a hitch rack to hold an ice chest. When removing the back licence plate panel I sprayed silicon lubricant for easy removal and easy reinstall. |
| OEM parts are always going to work and fit. Downfall is the time it takes to install on the Goldwing. I also installed the intake screens because the mice are why I had to change this filter, 10k miles on the bike is to soon to replace it. |
| Installed these with the switchback bulbs. Install was easy and look great. They also match the look of the headlights. Great upgrade to the front of the Goldwing. |
| I put these in new smoked lenses, didn't order the kit because I had the led flasher installed already. Running light is very bright and the turn signal is the same. More light on the front of the Wing the better to be seen. Easy install. |
| Best upgrade to the lights on the back of the GoldWing. Flash 4 times then stay solid when breaks are applied. Only hard part on the install is the new flasher, I went thru the dash. In the end well worth the time and money. |
| Ok at night, but not really noticable in daylight especially the amber turn signalband the brake light Quite disappointed. |
| Great choice of lights for inner city or highway. The more lights, the more you're noticed and other drivers do notice. Easy install is a good thing and it didn't take long. Instructions are spot on. My recommendation is give it a try, you can only be noticed more and that's what you want. They look great also. |
| I am jus 6 foot but have long legs but “normal” length arms. I have the Ultimate Tall Boy seat to move me 1 and 1/2 inches back to relax my leg position and these risers to more than compensate for the new seat position.The result is a more relaxed and comfortable riding position. My mechanic did the install when he was doing other stuff but says the instructions were good and there were no problems |
| E Z install. I like the clean lines and not noticeable when closed. Adjustment plates not stamped/marked L or R in my kit. |