Contact Us
| After careful research and close evaluation of pros and cons from various sources of reviews, I selected the Omni Floorboards for the extra footing area for our 23 DCT CSC Trike with the ground effects. This makes getting on and off much easier and more space to move your feet and legs while riding for extra comfort. These are heavy and well made. Installing the foot brake lever wasn't as big a deal as I feared. Yes, the lever is close but plenty of room. I primarily used my foot brake and never had an issue. After trying other products, I stayed with the Omni design for the Passenger floorboard and the Highway pegs. These all work perfectly for the trike application and would highly suggest these for trike owners. |
| These are nice quality, bright chrome. As running lights it has a row of inner white LED lights and row of amber lights. the white reflects well to show off the chrome. The amber also flashes for turn signals that really get attention from the side.Nice Safety feature. I had easy install with simple plug into the highly suggested Lighting Distribution Block. Suggest test fitting to exactly where it mounts. Then clean the area and stick the adhesive for secure install. I wrapped a very small wire to secure the top just as a extra piece of mind but wasn't necessary. If you like chrome, lights and added visibility, then you won't be disappointed. |
| This is a very nice cover as it will cover the my entire Roadsmith conversion. However, it will not keep the trike dry. The travel trunk and the seat gets wet during a rain and does not have to be a hard rain at that. |
| Materials are high quality. That being said there is one thing that I did not like. The back bolt, which fits into a slot in the frame, was very frustrating to install correctly. The bottom of this bolt has a slot in it to thow the correct orientation. I do not have a lift to get my bike up in the air. So it was impossible to see the slot. It would have been awesome to have that slot be deep enough to fit a slowed screw driver into it. This would serve 2 purposes, it would be a good way to control the bolt and it would be easy to get it correctly lined up. I ended up using a Dremel tool and a cut off disc to cut a very shallow slot into the bottom of the bolt and that did the trick. The right side bracket was no problem. The left side is way to hard unless you take the side bottom cover off. Once that was out of the way, it was easy. One thing I was concerned about was that the left side bracket where it bolts to the engine guard was not sitting flush against the engine. Dont worry, once you tighten the 12 mm bolt to the side of the engine, the soft aluminum bracket arm will confirm and sit flush. I pushed the belly pan as high as it would go and tightened it. Be aware of your hoses that come out near the center stand... Don't let them get smashed between the exhaust pipes, slide them over towards the outter left side of the bike. Over all it's a quality product and I expect it to last forever. |
| This holder is great! I have 3 of them total on different bikes. Very durable and well made. Recommend to anybody. |
| Added to both sides. Nice to rest hands on longer rides, especially when using cruise control. These are high quality and easy to add to the end of the grips. |
| I like the look as well as the added comfort due to the larger diameter than the smaller stock grip. You can tell a big difference after longer rides. Good quality and a quick simple install. Highly suggest adding the larger grips. |
| What else is there to say that others having already said complementing the Utopia Backrest. In my opinion this is a must buy. Recently purchased for my new 23 trike and what an improvement in the ride. This is my second Utopia backrest. I had another brand that was already on a bike I purchased that was no where as comfortable. Highly recommend. My wife likes the pocket and doesn't have an issue getting on or off with the backrest in place as it can lower down. |
| I wanted something to operate the garage door without having to rig up a place for the remote or get my phone out. This works from several hundred feet away. The installation instructions now incorporate the shortcuts that are shown in the videos for the top shelter. They still want you to take the entire back of the bike apart, so follow the instructions from the video. I used RV silicone spray to get the gromet to pull through, don't get stingy, soak the gromet and the hole and wipe up the excess after you get it pulled through. |
| Love this trunk rack. The reason I bought this was to mount the Honda OEM LED Brake Light. I did not want to drill into the trunk lid with the aftermarket LED lights. Somewhat expensive, but like the looks and quality of the rack. Thumbs up to WingStuff for fast shipping and a great price!! |
| Twin Rail’s upper surface presents a flatter contact with rider boot, compared to original. Feels sturdier and looks good with matching highway pegs. Plus their angle adjustment feature offers another improvement over Honda stock. |
| Wheel weights can fall off. Ceramic beads can play hell with the tire valve. Centramatics just work. Five stars! |
