Contact Us
| I have a 2015 F6B that I bought used, the previous owner had installed an “Ultimate†seat (really a very comfortable seat) and a Klock Works 12†windshield (not really a windshield, more of a deflector). I’m 6’1†and the deflector moved the wind right to the top of my head. At highway speeds all I could hear was the wind that was buffeting my head. I replaced the Klock with F4 Scratch Resistant Windshield for Honda F6B with a tint, installed air vent and 18†tall. The tint looks good and helps with reflection and is not to dark to interfere with seeing at night. The vent was a good choice as it allows some air to be directed to you on warm days and on cold days you can close it off. The 18†works for me as I can see over it when looking down the road or through it for closer views (the F4 is super clear, until it takes some bug hits – but cleans up nice with regular glass cleaner). Another benefit is that I can hear the radio at highway speeds now and do not have to have it turned all the way up. The only drawback was that one of the holes was off about ¼†and I had to use the dermal to make it fit. Install took 2 hours from opening the box. All in all, I’m very pleased with the F4 Scratch Resistant Windshield. |
| Have owned a lot of tire air pressure gauges, but this one is the best! At only Fourteen Dollars this is a steal! It is easy to use. Have another digital air gauge that I paid considerably more for and although it looks impressive is a pain to use because you have to hold it on the stem until it beeps and you probably lose abut a pound just trying to get the thing seated. This gauge is quick,easy and fits the stem so well it is a pleasure to use. Love this little thing and so will you! |
| I have a fully dress up with chrome and lights 2012 1800 audio confront black/gray yall make the bikes dress up in black/gray |
| This item is incompatible with Show Chrome/Big Bike BB52-766 or any other electrical item using the orange/lt blue wires of front running lights unless you wire this with diodes. The two items together seem OK until the Alternator kicks in putting voltage up to 14.5v. This item will back feed power to the running light circuit from the turn signal voltage. The diodes stop that behavior allowing proper function of the other device. |
| I purchased a set of these about 4 years ago and the install was very easy and they worked great. Then a couple of months ago half of the rear trunk light stopped working. I fixed it for a short time, but then it went out again. After looking at the chrome and seeing that it didn't look really good (chrome started to age), I decided to get a new set just for the truck. Put them on the same was and they look great. Drove to work and back (80 miles total), went to gas station and noticed that the right side chrome frame and lenses were gone. I called Wingstuff and they gave me the phone number for BigBikeParts. I called them only to be told I must have installed them wrong or someone pulled the off and that I could buy a new one for $15. So I put the old one back on. My fault |
|
I had the other backrest on the bike,the one with the bars that attach to the passenger handles. It would not stay in position and could not adjust the rest up or down nor would it stay forward enough for me. Always would work itself back to the max position. Decided to order the one that goes thru the seat. Man what a better backrest! Once you get over cutting your seat, its a snap to install and has more versatility as far as adjustment for the driver, plus it gives the passenger more room that the one with the bars. Love it. |
| these look great but cruise doesn't work. Reinstalled factory ones, cruise works just fine. |
| No doubt the Pathfinder RED LED bulbs are super bright, you will need to pay attention and plug these in and turn them on as a test before putting the bike back together again, reason, the tiny thin wire terminals are touchy, I will forever add dielectric grease when ever I take apart any connection or bulb, after I got my tail lamp back in I noticed that one of the bulbs was loose and it was not lighting up, back apart and I see the issue is the pathfinders don't really lock into position and easily pop out, the OEM glass bulbs are a tight fit, pathfinders are not, I simply used a small dab of hot melt glue to hold the bulb into the socket, I'm sure a dab of silicone will work too but you will need to let that cure, hot melt glue gets firm pretty fast and I don't think these will get hot enough to melt the glue out,sort of a design issue they might figure out soon, still worth 5 stars to make me visible ! |
| Great looking product, easy install. Slow speed handling has improved as well as high speed stability. |
| Great product, easy install. Made the bike fit me to a tee. Have had 2 other Goldwing riders that have ordered this product after test riding mine. They had no idea that there was a product to change the handlebar height for the Goldwing. Makes a huge difference in comfort. |
| Excelente producto muy satisfecho con el producto,pero quiero hacerles una recomendación cuando esté estacionada la motocicleta es mejor que cierren los posapies porque si por cualquier motivo laguna persona extraña se llega a montar y la motocicleta se caer el posapies al pegar con el piso parte la tapa válvula ya que este va soportado con dos tornillos a la tapa válvula. |
| The only problem with the risers is the Rack takes a 10-24 fastener and the risers come with 1/4-20 fasteners. You have to buy two 10/24x 1.5 for the back legs and the long fasteners with the Rack will work for the front legs. |