Follow the directions and place masking tape on your fender then place the fender extension tightly in place, then mark holes and drill. It comes out perfect. These fenders should be something the factory should have done from the beginning.
Measure vertically 1 3/4" and horizontally 7/16" and drill your hole there! Mine was about a 1/16" too high. Too low is better than too high, btw. And you shouldn't need to take the fend off to get it right. A template would have been welcomed.
Great fit and easy installation. They look good on the bike and help to keep the gravel, mud and road film from impacting and splashing onto the lower cowl and the under side of the bike.
We've been getting a lot of rain is sunny California lately. Even when the rain stops, the roads still have dirt and debris on them. This fender extension had helped to keep that junk off the front of the engine. This is a functional accessory!
Contact Us
