-
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
By Honda
- $289.99
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
201 Member Reviews
1 Star: 1
2 Stars: 2
3 Stars: 0
4 Stars: 5
5 Stars: 193
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
02.05.2011
5 Stars
Really sets of the rear of the bike,and a must have for additional visibility! |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
10.22.2010
5 Stars
Got this installed last night between getting home from dinner with the family and going to bed shortly thereafter for an early start the next morning. It literally takes more time getting the screws out of the inner trunk liner than it takes to install the spoiler. This piece adds nice lines that seem to be missing from the bare trunk even with a luggage rack installed. It just finishes the rear of the bike. I think it took me start to finish about 45 minutes including making two copies of the template and cutting them out with a razor blade for accuracy. Taping the templates to the trunk with masking tape, I used a pilot drill first (about 1/16th) and then drilled the 7/16th holes required. Pull the rubber grommet through for the wiring with a pair of needle nose pliers and the rest is cake work. It is pricey for what the component is made of but well worth it if you seek to add that finishing touch to your masterpiece. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
10.03.2010
5 Stars
Beutiful piece. Perfect color match (of course) Rainy days are made for projects like this. I didn’t time myself but the install was much easier than I expected. This review is actually being written for a couple of things that were on a short list of items which I wanted to install first (OEM Spoiler, Luggage Rack & risers). Tips that I learned here were very useful – thank you ! I put on the spoiler first with the Show Chrome Running Light Converter. Did this to ensure the Luggage Rack would not interfere with the Spoiler. The template that came with the OEM Spoiler made it a breeze to install and yes, like everyone else, I was a bit nervous using a drill on the bike. By the end of the day I had drilled 9 holes in the trunk, 5 for the Spoiler and 4 for the Luggage Rack. Only hitch was dropping one of the screws from the inner trunk liner into the bike somewhere despite laying a rag over the frame to prevent just that from happening. Hopefully it falls out the next time I use the bike but with 15 screws, I doubt that 1 missing screw will make much of a difference. Back on topic . . OEM Spoiler 1. Disconnected the negative connection on the battery 2. Removed the seat (needed to do this for the running light converter). Remove the grab rails. When taking off the seat, start in the back. The bottom of the rear back rest pulls out and then work the seat off, starting in the back (owner manual doesn’t give instructions for this so I thought it would be helpful). If you have the comfort package, don’t forget to unplug the wire harness from the seat. 3. Put a blanket or something over the frame (keeps stuff from dropping into the bike, the rag I used was too small as mentioned above). 4. Took out the trunk liner. Directions don’t say anything about unplugging the module screwed into the trunk liner. Not a big deal but annoying. Press in the tab and pull out the white part. 5. Marked my holes using the template (taped it lightly so it would not slip; flipped the template and repeated for the 2 holes on the right side. 6. Drilled the holes per instructions. Chipped some paint while drilling but the spoiler covered those imperfections nicely. 7. Used a small amount of silicone spray and a small screwdriver to push in the rubber grommet where the wires come out of the spoiler 8. Removed the cover that sits between the saddle bags. 9. Had my 12 year run the running light converter wire with the 3 prongs down the outside of the trunk (he likes to help) and used fish wire to pull it through 10. Plugged in the 3 prong connecter below the bike 11. Plugged in the 2 prong connector in the trunk 12. Used cable ties and some electrical tape in spots to keep the wires neat. Harness is long enough, Make sure it does not pinch anywhere. I ran by the bottom left most screw where there is a small gap between the liner and truck lid.. 13. Plugged the battery in temporarily to test the rear lights. I’m very happy with the running & brake light. Since I finished at night, I could really appreciate how bright these were – looks great. Luggage Rack and Risers - I'll have more details on my review of the Kuty Rack and Risers Hope this is helpful. Remember to wait for a rainy day and take your time. Ride safe. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
08.13.2010
5 Stars
Awesome product and instructions were surprisingly good. The template for drilling the holes made this an easy project. The only problem I had was getting the rubber gromet properly into the drilled hole for the wiring. A little silicon spray fixed that. The color was perfect and it looks great on the bike. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
07.16.2010
5 Stars
This is a really nice product. Installation took about an hour. The template is a very nice safety valve but the holes were about a 16th off but with a little maneuvering with the drill bit all is well. Had a small issue with getting the cable down to the liscense plate area but bought out the plastic hangar and pushed everything down. Very happy with this product. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
06.27.2010
5 Stars
Purchased the Pearl white product. Color match was right on. Delivery time took a while but it was worth it. I looked at the instructions and wasn't sure about drilling holes myself; took the bike to my dealer and had them do it. Wonderfull product. I had them also install the running/brake light assembly. The light is plenty bright as a running light and is very bright upon apply brakes. Really adds a nice touch to the Wing. I agree with other; Honda should make this a standard feature. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
06.03.2010
5 Stars
Have had this on the bike for about two years now. Really like the looks. Have alot of compliments. The bike just looks finished with this addition. Good install. Drilling the holes can make you nervous, just take your time. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
05.03.2010
5 Stars
Great upgrade. Easy to install and added braking lighting. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
04.28.2010
5 Stars
I added it for the safety factor, the good looks was a bonus. I replaced the OEM spoiler light. It now functions as a running light, flasher & signal light. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
03.02.2010
5 Stars
The is a easy install but should come with the brake/running/turn signal light standard. The safety factor alone should require it. It does take the bike to the next level. |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
03.01.2010
5 Stars
More visibility is always good and this helps. I added EC 1320 run brake turn to give even more lights |
Factory OEM LED Lighted Trunk Spoiler for GL1800 1st Gen
ITEM CODE: PG00029
02.20.2010
5 Stars
Okay, this is a pricey little sucker, but OH MAN does it make the back of the bike look good! Got the color matched Cabernet Red for an '06 model. Installation is straight forward and the template provided in the instructions for drilling was a life saver! You have to drill five BIG holes in your trunk for this baby and the template takes the guesswork out of it and certainly adds to your piece of mind when applying drill bit to plastic! I swapped the OEM light bar out for the one that functions as a running light, brake light and turn signal. Love the way it looks and very happy to have some additional lighting up higher on the back of the bike! Like all things Honda the fit and finish are perfect! Love this spoiler! |