Contact Us
| Works great and is comfortable with my 1/2 helmet. Communicates well with my passenger |
| The seat is pricey but it is very comfortable. It is a firm seat at first but after a 20 minutes you start to sink into the seat a little. It is kinda like a firm memory foam mattress that gets more comfortable as you sit on it. When you get off the bike after a couple hours you can see the way the seat comformed to the bum a little. Where as the stock seat was springy and always pushed up on my bum. I purchased the midrider because I didn't want to be any further from the handle bars and my wife has a very big but beautiful bum so she needs the room on the passenger side. She loves the new seat. I measured the seats against each other both on and off the bike and the ultimate seat it technically 3/4 of a inch taller than the stock seat. However, if I mark a spot with tape on my windshield both the stock and ultimate seat are relatively the same eye level. I imagine the extra height in the ultimate is to compensate for settling in as the memory foam conforms to you. At 5'9" I can still Flat foot it but it is a little harder, mostly because the seat is slightly wider and is shaped slightly concave where the stock seat is slightly convex. As for the backrest, it is very comfortable and easy to adjust forward and aft, but there is no height adjustment. I know they design them to be height adjustable but the backrest when pushed all the way in hits the last notch so it is only one height. My biggest problem with the backrest is it removes very easily, too easy in my opinion. I got the heated version and when I first received my seat it was to warm to turn the heat on but a week later I did a cold morning ride and to my surprise the heat didn't work. I called ultimate who paid for the shipping to repair it and the heat works great now. I recommend testing the heat feature right away. Overall I am very happy with my purchase. |
| Excellent decision to install these! They really make a difference on cutting down the air to the drivers have and my wife says much less air on her |
| One of the best add ons I've put on the bike! The difference they make on buffeting is amazing! |
| This is a must have for the passenger. It also is functional as a tie down point for my luggage. As well as a much better spot to lock a helmet. I have a standard bicycle lock I just run through my helmet and the grab rails. Definitely worth the price and super easy to install. I did download the instructions but only to get the torque specs which were 27 nm or 20 lbs per foot. |
| Not sure if this hardware is necessary; it may be just a way to gouge another $40. I can't be sure, but maybe the old hardware would have worked. Can't tell the difference just by comparing the old and the new. For sure the new spring is too weak. |
| The install instructions are the POOREST ever - may as well just say "Take the old stand off and put the new one on". Says to take off the chrome muffler cover, but doesn't specify the left or right, so one has to guess. Then, no clue as to how to take the cover off. Couldn't get the cover back on - a mechanic had to do it. Then, no guidance how to get the spring off the old stand - had to cut it off. And no guisance as to how to get the new spring on - had to buy a spring install tool. And the new spring is too weak to get the stand all the way up. Once on, the stand works well. The instructions say to get the rear wheel off the ground (to check air pressure) , put a one-inch board under the stand, but it is VERY difficult to get the bike on and off the stand.I kinda wish I'd just left the old stand on. |
| I had HIDs installed for all 4 lights. One low beam started to fail, so installed these for the low beams. I also have the 'Low Headlight cutout relay" installed. These worked out great. Easy install, and bought a few self stick wire clamps to hold the wires/drivers out of the fork space. Nice lights. |
| I just bought this with the left side mount for my 2018 Goldwing Tour DCT. The package arrived well boxed, with no damage. It included instructions. The fit was good and it went on fairly easily though some fiddling to get the mount to hook correctly was needed. Its nice looking - I hope the chrome lasts in the weather without chipping or fading, only time will tell. The rubber holder itself appears very solid, I like that should it touch the bike it wont damage the paint. (No reason it should as the holder keeps it fairly high). Now all I need is some good weather to properly test it out |
| Easy to get on and off and secure. Folds up small, so easy to stow in saddlebag or trunk. I like that there are no hooks (metal or plastic) used to secure it to the bike, just loop the straps over the rider foot pegs and you're good. Little pricey...but good quality. |
| Great fit, great price. This kit helped make my first oil change on 2019 DCT Tourer a breeze. |
| This fit my 2019 fine - screw size and hole placement were correct for this order and install in April 2021. I am satisfied with quality, price, looks, and function of this product. |