Contact Us
| Also, for me the visor is a MUST HAVE since I wear prescription glasses and I am rarely able to wear sunglasses. The visor shades my eyes great. |
| I love a SHOEI helmet, fits great. Hint: When installing a J&M headset you need to cut the foam in th ehelmet where the speakers go all the way back for a comfortable fit. With my big ears it just wasn't comfortable until I did this, then I loved the SHOEI again. |
| Fit perfectly as expected |
| I installed the monotubes with 7700 miles on the clock. The front end is a little higher using the recommended shims and also stiffer. The additional height did not create a problem for me and the firmer forks planted the front end in the twisties. I also disabled the ADV and with the firmness the ADV, in my opinion, is not needed. Installation is easier than expected, can be done by a novice. The fork seal rebuild kit is a must when installing monotubes. |
| A lot of helpful information with a visual to see how to do things. I was a little surprised, having never seen a Fred video before, Fred he explains things same as you or I would do the task. Fred often makes references to the Honda shop manual which is a big plus for those of us who have the $80 manual but with his directions a manual is not a requirement. |
| Good product works great even after 18000+ miles no complaints. |
| Worked good the first 2 times. After that the poles consistently collapse during parades. Talked to others with these poles and they carry duct tape and tape the joints so the pole does not collapse. But that is a pain after the parade since you then have to remove all that tape. And yes I am locking each joint correctly |
| Holds alot and the rain cover works great. Keeps everything dry!!! |
| They are not a good fit at all! I battled for and hour to get the right side on as the holes didn't line up at all. Had to force the screw in crooked and of coarse split the plastic holes. Finally employed some gorilla glue, they look great! COME ON SHOWCHROME! you can do better. |
| I've now had the Park-n-Move for three years. I, too have the Baker ride-off centerstand which is shorter than the OEM. I use 3, 3/4" thick boards to roll the rear wheel up on to make it easier to get onto the dolly. I use 2, 3/4" boards laid on top of the dolly to get keep the rear wheel in the air making it easy to move the GL1800 around the garage. I use the control joint in the garage floor to catch the front wheels of the dolly so I can rock the bike off the centerstand. The non-functional wheel locks are a minor nuisance rather than a dealbreaker. Without this tool I would have to build a garage for the Goldwing! |
| Installed very easily and look great. |
| Purchased this vest when it was on sale. The wife has no complaints. Size is correct and appears to be holding up well. |