Contact Us
| Installed per instructions using the snap ties. I also put 4 good size dabs of Loctite brand clear silicone sealant on the inside of the center ridge (the sealant I use for all my trim work). After removing the temporary ties after the silicone cured, they look awesome with no gaps. The included tape on the grills keep them from moving around while the sealant dries. The silicon sealant gives the permanent holding power. I also installed the upper chrome trim piece and the combo looks great but that piece is not shown on this site? Be sure to put little pieces of blue low tack painters tape around the edges for the trial fit so the permanent install is easy to line up. |
| Took me awhile to buy these, but really glad I finally did. The fit was perfect and it adds that finish touch to an expensive bike. You also have a tendency to keep the trunk and saddle bag area clean now. |
| It is small and does the job. It takes awhile to inflate a tire with no weight on it. |
| Tried this again with good 3m double sided tape and better silicone. Let it set for 48 hours tied on. 70+ degrees. It gaped again all the way around it and pulled right off. There is not enough contact area around the edges to hold this on. You basically have the center part holing it and that's it. A big fat 0 for this part but but an A+ to Wingstuff for taking care of me. |
| Very nice, well made. Only issue, does NOT fit the Nolan helmet latch. Other than being too wide and thick it is great. |
| Remarkable upgrade from stock. Easy install and easy to clean. More bling in just the right places. |
| Looks good and slips on and off very smoothly. It's a really nice dress up item at a reasonable price. |
| Simple install. hadn't ridden two miles before I noticed the improvement in front end. No more hard jolts. Rides as smooth at 45 as it does at 80mph. Highly recommend this simple product. |
| Very nice OEM look. The meter is well lighted for very easy night-time viewing. Very easy install with the panel available for plug and play install. |
|
I looked at this for a couple of years. I called and talked to the owner/manufacturer and we had a very in depth discussion. I wanted to install this on my 2010 GL1800 Audio & Comfort model ...... The only drawback to mounting on the heated grips model is a slight interference with the heated throttle grip electrical cable. This is the reason for the non-fitment issue. I found that the interference only occurs with a wide open throttle position. I rarely open my throtte wide open, and if I do, I am aware that I have to manually close the throttle past the interference and all is good....... It works just fine for me, but it may not for others. |
|
I purchased Progressive suspension components for the front shocks and a rear spring for the rear shock on this web site. I also purchased their Progressive spring compressor in order to install the rear spring. Progressive's part number for this compressor is 32-5508. After getting the motorcycle completely disassembled and ready to install the new rear spring, only then did I discover that the compressor won't work on a Gold Wing. The threaded hook at the top is too large to fit through the top shock mount, and there is no adapter for it to fit around the hydraulic line on top of the shock. Progressive apparently did at one time make a compressor, part number 32-5509, for the Gold Wing but no longer sell it. My bike is currently apart all over my garage while I contemplate a way to rig up something to install my new spring. I buy just about everything for my bike from this web site, have for years, and will continue to do so. This is the one and only purchase I have made that was a problem. |
| Great oil for my 2006 Wing. 70k miles with no problems. Fair price and fast delivery. I also bought the New Generation Adjustable Hand Wings on this order. They deflect the wind from the grips very well. Wish I had bought them earlier. I have never had a problem with a WingStuff order. |