OUT OF STOCK
-
Lighted LED Red Lens Trunk Molding for GL1800
By Kuryakyn SKU: KU3201
- $228.99
-
-
-
Your Bike
Will this fit your bike?
-
Related Items
197 Member Reviews
1 Star: 2
2 Stars: 4
3 Stars: 7
4 Stars: 32
5 Stars: 152
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
03.28.2008
1 Stars
The first problem with these during the install was that the pigtalls they gave me were not working properly and one of the wires on the lights was not connected. They sent me off new pigtails, (a week later before I got them) and I soldered the light back on. When I got the pigtails one would not even fit. I Visually looked at the connector and the pins were not aligned properly. So now I have one that fits and another one that does not fit. When I tried the one that fit, the lights still did not work. I believe additional problems arose when taking things apart to trouble shoot them. The original connectors fit so tight, that they when you tried to disconnect them the pins in the back came out before you could get them appart. The new ones they sent me did not have this problem. I asked the shop that services my bike if they ever have problems with Kurakyn parts. They mentioned the West Coast rep for Kuryakyn services his bike with them then said: "We never have had any problems with them, and when we do have problems, they replace any part that needs replacing." I guess they they go through the boxes of these they have until they get a set that works and then they give the bad parts back to Kuryakyn for replacement. Now when I talked to wing stuff they said send them back, if they are like new and they would replace them. Well I had already soldered the wires back on and it was definatly not new anymore. So I guess I'm going to eat this lesson. If you are lucky enoough to get a set that works, my feeling is that when you have to take them apart for what ever reason you will run into problems becuase of the connectors. If you like Harleys you may like these products. Kuryakyn wants you working on your bike instead of riding it. After two weeks of trying to make them work, I decided to go for a ride and use them without the like working. ya, I know look tacky, but if I wanted to just work and just look at my bike I would have bought a Harley. Obviously my recommendation is not to buy these, but if you do, good luck. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
03.25.2008
4 Stars
When I got these in I couldn't wait to put them on. They look great and the instructions was on the money. Only wish they were metal. The holes need to be a little bigger then suggested when putting on the saddlebag mouldings. Lots of lights now:-) |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
03.24.2008
4 Stars
I love the look, but I do have some comments. These re-use the OEM screws from the original moldings, and I think they might be a little too big. You can hear the mouldings crack as the screws go in. Mind you, it was only about 10 degrees C when I installed them. Sofening with a hair dryer, or drilling them out a bit might prevent. Make sure you understand how the trunk moulding fits together before attaching to the bike. The wiring sticks out the end of the center section in the way it is packaged, but cannot remain there once installed. If you only discover this once it is on the bike, you will have to remove it again. For the saddle bags, Kuryakan could have given a couple inches more wire for the side pieces (I had to extend mine in order to install them), and the rear piece has you drill two holes on each side to pass the wiring. These holes just cry out to be a bothersome leak in the saddlebag in the future, so I went and spent the $2.00 to buy rubber grommets for those holes, something else that should be part of the kit. But all-in all, a great enhancement to the bike once installed. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
03.22.2008
4 Stars
Bought these and had dealer install them. Have to watch and make sure you plug the tall light harrness in correctly. Dealer pluged them back in wrong and brake lights stayed on. *** Dealer was not even aware that the plug could be pluged in two ways.*** |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
03.17.2008
5 Stars
This makes all the difference in the world in the appearance of the bike in both day and night. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
01.29.2008
5 Stars
I put on trunk and saddlebag moulding and my black GL1800 looks great. Not only for better looking they give you better visibility on the road. Don’t hesitate to put on the lover moulding too. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
01.27.2008
5 Stars
One of the first things I installed on my wing were these bag and trunk moulding with LEDs. They are worth every penny and easy to install. Lights up the side and rear so NO ONE can say that they couldn't see you. The chrome makes nice addition and breaks up the color really nicely. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
01.22.2008
5 Stars
I have installed both sets and love them. They are just as sharp looking in the daylite as they are at night. Really sets off the sides and rear of bike. Must remove tail lights to drill hole and tie wires in but it is worth it. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
01.21.2008
4 Stars
Broken tab right out of the box where the screw goes in. Look's great on the bike, but be careful installing these because they are fragle. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
01.14.2008
5 Stars
I have both trunk & saddlebag Mouldings. The directions are easy to follow. They fit & look great. Adds to back of bike,looks & safety. Nothing to splice all connections are plug in. Looks way cool at night.Will add picture to gallery. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
12.02.2007
5 Stars
They look great and the fit is perfect. It only took a couple of hours to install both trunk and saddle bag lights. The splices for the saddle bags are cheap, thats the only negative comment. |
Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201, SKU: KU3201
11.02.2007
5 Stars
Just had both sets installed. I had the dealer install them (no charge)....no way I could drill into my new wing. They really look great and add great additional lighting. I highly recommend them. |