Contact Us
| easy to install and does a good job of filling the gap between the tail lights. be sure to leave a little extra wire incase you ever need to use your key. |
| this may not be an issue with other phones but my phone is suddenly acting spastically now after using this phone holder. I wonder if there is a solution for a vibration free mount to give me the reliability I need to keep using otherwise I'll have to throw it out. |
| Perfect for travel. I've carried it and used it daily for months long trips. Packs small so fits into the luggage easily. Water resistant--almost waterproof--so keeps the seat dry. Protects from sun so the seat is cool. Does exactly what I had in mind. Even stays in place rather well in a storm. |
| I just finished an 8,000 mile trip on my 2018 Gold Wing Tour Trike with the Hannigan trike kit. The half cover is the only one that would fit. I was apprehensive about how long it would last. I was thoroughly impressed. It survived rain, heat and high winds (over 45 MPH winds). Every morning I would come out to a great fitting cover on a clean and dry Wing. The elastic straps held the cover on perfectly. In the 110 deg. heat of Las Vegas the straps and cover are not giving up and still look as good ass the day I opened the package. I will definitely keep this on my trike for at home and on the road. Thanks for a great product. |
| This Stainless Steel version is a beautifully well made product. It was pretty easy to install and will provide great undercarriage protection. The front portion is attached with two screws that allow a little movement. As a result, the forward portion can rattle where it touches the lower cowling. I resolved this by putting a strip of 3M Waterproof Electrical Tape on the edge of the cowling that contacts the Shield. This tape is thick, sticks forever, and is not noticeable in that location. |
| easy to install. must have product |
| I replaced a larger portable pump with this kit because it has everything you need in one nicely organized pouch. I tested it when it arrived to see how noisy it was and was pleasantly surprised with the level and performance. All the tools you need to repair a flat are there if you need them. The entire pouch is very compact and takes up very little room. The only negative thing I found is the tiny compartment that stores the power cord. Once you pull that out you will spend more time getting the cord and plug back in the pocket than you did fixing a flat. That aspect needed a little bit more space but hopefully you will never need to pull it out right? |
| Great looking and functioning set of highway pegs. Provided instructions allow for easy instillation. As a seasoned owner of Kuryakyn highway set ups for over 20 years, I will attest these satin black Omni pegs fit perfectly and will remain on my 2021 Goldwing Tour until the next Wing is purchased. Only 4 stars because one peg mount to the arm was a pain in the $&@ to tighten probably due to powder coating overspray in the female end…other than that, it would have been another 5 star product from Kuryakyn! |
| Matches the blacked out style of 22 goldwing. Easy to install and wife's more comfortable with the adjustability of the pegs |
| Key came as factory blank. Was easy to get cut to match factory. Works great and fits right in the key fob |
| The Commander board material seems to be great quality and Wingstuff hasn't failed yet to offer the best price on my accessory purchases. Delivery was prompt. What I like best about these boards is their relative height above the asphalt. They do not reduce cornering clearance as much as some competing products do and the boards can be quickly remove thereby reducing the cornering limit to just the crashbar mount itself which is minimal. Unless you are trying to catch a sportbike on some curves your cornering clearance should be more than adequate.My small knock against the boards is they are a little narrow, fitting closely to the sides of the motorcycle. Prospective buyers may want to add offset extenders which I obtained from a different vendor. The standard board position, without the offsets, will probably put the sides of your lower leg in contact with the rear corner of the cylinder heads. That might make for some heat discomfort. The offsets also offer more positioning options for those riders on the upper and lower ends of the inseam yardstick. Be aware, should you choose that option, the bolts in offset kit I was sent were not long enough to engage the nylon inside the fixing nut. I found two replacement bolts in the fastener aisle of my local Home Depot.I also bought the board manufacturer's trim to finish the bodywork around the removed crash bar cover to which the boards are attached. Mounting them is easy. No fuss, no mess. On-line videos are available if needed. |
