A must for cell phone recharging and other 12 volt accessories requiring power. I have one in the left fairing pocket (which is powered ignition on only) and one in the trunk (which is powered off the battery) Both were easy installs and the factory bike male part of the connectors were right where I installed the sockets. |
Installed two in the last week, The first one took it longer but took off more than was needed the second one went very smoothe. He i note there has been a upgrade of these so they work right on our lights, the diffence in the units seems to be the size of the white and red wire which is larger on the right module. looks good. I wired up to the top brake lights only left lowers alone. |
Great Price and very much high quality item. Really makes a difference in the looks. Obviously it's simple to install, well worth the money. |
Easy install and a good device to have to make sure charging system is working |
Very nice looking and strong. The fiber lock nut is just a little bit hard to tighten near the saddlebag otherwise easy install |
Looks good, A nice addition, easy install. Much nice then the flat black/grey factory ones. |
These are great ONLY if you order these with the rack. Adding after new holes needed. They should have made the rack this high to start. |
This is not a quality product, I wish I'd passed on them. If you really want to install these grips, throw away the adhesive supplied and find something better at the hardware store. As far as working once you get them on, they are just OK. I was able to align them properly and they feel fairly good, if you have large hands. But I have a feeling I'll be taking them off eventually, because the poor fit of the mating surfaces will cause them to work loose. |
Put these on 10/06. My wife loves the comfort of the folding pegs. Wouldn't leave home without them. However, the chrome is starting to look like it has the pox. Unlike Kuryakyn. I expected the plating to last more than 6 months. |
Even if you're not a chrome freak, these vents accentuate an area of the bike that needs it. Easy install. |
"Beefy" item, easy to install and provides for a slightly lower mello sound. You may have to adjust your exhaust pipes a bit to make them straight. |
Once installed, is a useful item but, installation instructions left alot to be desired. There was no drill mark on the inside of the left speaker cover of my 2007 (as indicated in the instructions). A place (hole) is provided from the factory to insert the contact switch but, it is not immediately obvious. You'll still have to drill a hole to run the harness. Not a heavy duty housing and light but, does the trick. If you want to install a 12 volt power socket in your trunk, now would be a good time. I have mine loose in one of the pockets of my Chocko trunk lid organizer |