Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

Kuryakyn Driver Backrest w/Storage Pouch for GL1800
ITEM CODE: KU8990,   SKU: KU8990

10.22.2007
Made the dealer put it on before I would take bike home. Did notice at first that I seemed to lean forward somewhat. I figured that was as much to do as coming from a cruiser to a wing. Have since put 2500 miles on and wouldn't want to ride without it. If it did lean back more I think I would be in my wife's lap. Only negatives is it does confine my wife's legs somwhat and rubs on seat when tilted forward, but does not seem to hurt anything. Still highly recommend it.
Was this helpful?

Vertical Trailer Hitch for GL1800 1st Gen
ITEM CODE: KU7642,   SKU: KU7642

10.22.2007
Very easy install, directions are precise and easy to follow. There are just four allenhead screws holding on rear fender panel on 08 model, so don't worry about looking for the 5th one. Hitch is very stout. Pulled Bunkhouse camper over 300 miles without problem.
Was this helpful?

Kruzer Kaddy Drink Holder
ITEM CODE: PG20116

10.21.2007
A MUST for the lond rides, easy to install.
Was this helpful?

Deluxe Grey Half Cover for Goldwing
ITEM CODE: WSHALFGR,   SKU: WSHALFGR

10.21.2007
Great all weather cover, I bought it when I take trips and park out side at the motel. You do not have wait until the bike is cool to put it on, that is what I like about it the most.
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

10.21.2007
I thought that the highway pegs were to high priced, until I bought them and installed them, and took them on a ride.
They are great and worth every penny.
Was this helpful?

Chrome Footpeg Mounts for GL1800
ITEM CODE: KU4544,   SKU: KU4544

10.20.2007
These are great, don't forget them when dressing up the side with chrome. Install couldn't be any more simple...unless you con someone else into put them on for you.
Was this helpful?

Lighted LED Red Lens Trunk Molding for GL1800
ITEM CODE: KU3201,   SKU: KU3201

10.20.2007
I agree with several of the others as far as the time needed for install...about 3 to 4 hours. I tend to take my time however when putting things on my wing. Instructions were clear but I'm like several others, ANY drilling that's required scares me. But, it was accomplished with a minimum of spent nerves...I got my brother to drill it since I developed a bad case of "WUSS." Take your time read the instructions well prior to install. Kuryakyn has done their homework here the instructions are very clear and easy to follow. You're gonna love these.
Was this helpful?

LED Clear Lense Trunk Spoiler Run/Brake/Flashing
ITEM CODE: PG20043

10.20.2007
This is one of the best things I've ever had on a motorcycle. I promise you WILL love this spoiler light. The improvement in the visability of your bike is worth it all by itself. It is VERY easy to install as the instructions are quite clear and there really is no trouble following them. The difference it makes to the rear o your wing is nothing short of remarkable. Worth EVERY penny spent on this.
Was this helpful?

Wig Wag Brake Modulator
ITEM CODE: PU20500031,   SKU: PU20500031

10.20.2007
Absolutely cannot say enough good things about this product. Safety first ALWAYS...and this provides an extra measure of it. Very affordable and a must have item.
Was this helpful?

Chrome Passenger Floorboard Side Covers
ITEM CODE: KU7506,   SKU: KU7506

10.19.2007
Looks great, inexpensive, and install both in under 15 minutes.
Was this helpful?

Battery Tender Plus 12V Smart Battery Charger
ITEM CODE: SOMS017102,   SKU: SOMS017102

10.19.2007
Have one for both bikes. They are a snap to install and they work great. Never had a problem with them whatsover. Bike is always ready to roll.
Was this helpful?

Chrome Lower Front Cowl for GL1800
ITEM CODE: BB52608,   SKU: BB52608

10.19.2007
This thing looks great on the bike. Add the timing cover and the led lights at the same time. It is a bit of a pain to cut out the light holes. I used wire clippers and a fine file. Added about 30 mintues to the install. Otherwise a very easy install and an awesome addition for the front of the bike.
Was this helpful?

29276 Reviews Found

| 2254 |