Contact Us
|
I had this on my wish list but was in the local Honda shop and purchased it there. WRONG. Payed $130.00 with taxes should have waited on ordered here. The installation was a breeze, completed the entire process within an hour. |
|
For some reason, I expected a converter plug to yield a 4-pin plug that would connect directly to the trailer. But, as the picture shows, this converter has no trailer connection. It plugs inline with the Kuryakyn isolator and remaps the functions of its wires. Sadly, the instructions do not indicate the functions of the wires once remapped. It is left to the installer to test each wire. Care must be taken because although it uses standard trailer wire colors (Yellow, Green, Brown, White) only white is standard function. Without a plug, you're forced to buy another product and solder some wires. No big deal but annoying. That said, it does what it's supposed to do. |
| This tire inflator works great, I thought it would take forever to inflate my tire but after running for about a minute my tire went from 15psi to 40psi. It is perfectly sized so you can take it with you anywhere. I love it!! |
|
Got my radio and OEM antenna for Christmas, and had AJ and his crew install them the first part of Jan.. A member of our club reported static, buzzing and short range with his, so was nervous about it as I don't do "not good" and didn't look forward to the hassle it it wasn't good. So after using it successfully for a while now, I have no problems, and find it works great. I wanted it for safety on solo rides on the big road, and bike to bike, but not many have em as they are so pricy. I use a Scala Q2 for bike to bike in my group, which is way good for a lot less bucks. I have both set up in my same helmet, two sets of ears and two mics. No problem to use and not hard to do. |
|
AJ and his crew installed these today. Rode 75 miles home. I'm 6'4" and always felt the bars were too far away, and felt pressure in my shoulders on long rides. These risers fixed it! No more feeling pressure or feeling the bars were too far away. Very comfortable now, hooray! This is a "must do" for any serious cruisers. Checked out the other risers, felt the grips may hit my legs or tank on max turns. |
| AJ and their shop installed the left front today. Were getting a little thin at 19,000 miles. Noticed some "burning smell" returning home for a short time. Stops fine, a little more lever, otherwise the brakes seem "normal". |
| It took me all of 30 seconds to install... looks GREAT! |
| Awesome, a little soapy water and yes their a bit tough getting on, but you don't want a loose fit. They give you the feel and comfort you expect. Heat comes through just fine. |
| Ordered 2, the multi-color has great flashing patterns, haven't figured out where to put them yet to get the full effect, let me know if you have a good place for them, I am thinking I will put them behind the chrome air intakes of my fairing. We will see!! |
| Installed them into my Fulmer helmets for both mine and my girlfriends helmets, you have to really crank the music to hear it, and I am worried about blowing the speakers, so I am going to try what the previous installer said, and install some foam behind the speakers to push them closer to ears. Trial fit where you put the double back tape for the microphone to get the mike in the right place in front of your mouth. This thing works great for traveling with your co-rider, helps the converating greatly, and the gold wing allow you to turn off the voice activation when you don't want to hear background noise over your music. Over 80, road and wind noise affects the volume of the music considerably, but it may just be the helmet I am using. |
| Looks great and I love the long sleeves for riding in the summer, the red white and blue flames on the sleeves are killer. |
| Looks great and I love the long sleeves for riding in the summer, the red white and blue flames on the sleeves are killer. |