Contact Us
| The original gray piece has been always displeased me. This one went one easily and looks great. Added this and the chrome floorboard covers and didn't spend 30 minutes on the whole project. One of the pieces that you screw into cracked but I'm sure it will hold together. |
|
I installed these on our new '12 wing, and although they look nice, they weren't an easy install. I had to grind down a "flat spot" using my Dremel tool, because if you read the many other customer's reviews; with the way these are designed, you just can't tighten them enough, (small allen screw holds in place to keep from moving around.) They obviously forgot ALOT of weight & pressure is applied to these boards, so they should be made NOT to move, at all. Because if they come loose on the road - that can be DANGEROUS! (IMHO - It's a REALLY POOR DESIGN) So to prevent that from happening, I ground down a spot on the mount - so the supplied allen screw had somewhere to "lock into", and keep the boards from coming loose. I also have big feet, (size 13 shoes) so I had to mount these at a weird angle to allow my toes under the shifter. They are not "Height Adjustable", which is REALLY disappointing! Overall, they are nicer than the stock pegs, but I doubt I would buy again. I was really disappointed!!! Ride Safe! |
| I installed these in my new '12 wing and they fit perfect & look GREAT! Way more reasonable than the OEM "Goldwing" carpets. In my opinion, who the heck's gonna see the Goldwing emblem anyway one you start putting stuff in the bags & trunk? Right? I'd rather spend the money I saved - elswhere where it will be seen! Thanks Wingstuff, for a nice, reasonably priced product! |
|
I had dealer install this on my new '12 wing, and I am glad I bought it! It REALLY looks nice and adds high visbility to the rear end. (see my pics) In my opinion, you can never have enough lighting on a bike. The only thing about it that I honestly didn't like - was after about 300 miles, I had to take it apart and hot glue the plastic lens, frame & plate together, because it looked like hell with the license plate and cover moving all over! Now it looks alot better!! Definitely worth the money! I Highly Recommend! |
| I installed these on our '12 wing, and they look REALLY SHARP! (see my pics) They make a HUGE difference in appearance, and although they are expensive plastic - I HIGHLY RECOMMEND them! Covers up that ugly grey frame. ~Install was easy, took just minutes, just peel & stick & you're ready to ride! ** Make sure you clean with alcohol first for good adhesion! Enjoy & Ride Safe!! |
| I had to order these covers for my chrome LED switch blocks that "don't come with chrome covers".. DUH? What the heck?? Anyway they look really sharp! Highly recommended! |
| This product ONLY works with the Kuryakyn Isolator, found out the hard way when I ordered this unit by mistake to work with another manufacturer's Isolator relay. Low star rating is for there not being a heads-up. |
|
After purchasing the 20 oz Butler for myself, it was decided to go with the 34 oz for the passenger. I have the Honda armrests installed therefore installation required the 'Butler No Armrest' kit. I think it is a bit expensive and I do not care for how large it appears hanging off the side of the motorcycle. These reasons deduct one star from my rating. It was easy to install and seems sturdy. These cups are convenient and will make other 'non-Butler cup' riders envious. Just ask anyone that has spilled or had their drink blown out of an inferior cup. |
|
Put the Add-On hitch on my 2010 Wing and I needed a third hand to pry (nudge) the brackets to line up for the bolts. I would recommend having a buddy assist because you need to be behind and alongside the bike at the same time. After one pinched finger while trying to manuver the long bracket to the saddlebag support, you will agree. Getting the bolts to line up was difficult but like in Ronnie's review, the hardest thing was replacing the rear fender. I had to spread the bags to get the holes to line up in the H bracket. I have a slightly wider gap on the left side adjoining saddlebag. Overall I love the hitch. It is out of site when not in use. I use it to tow my pet trailer or autolinx carrier. |
| I just recently purchased and installed the Centramatic balancers on my 2008 Wing. So far I have already noticed a marked improvement in the ride overall, but the biggest improvement that is quite noticeable is the lack of front end wobble. On long rides I could notice a slight handlebar wobble from timt to time, especially on rain grooved and light bumpy roads. This is no longer a noticeable problem. As for tire life, I installed new Stones at the same time. Time will tell. |
| I bought & installed the Kuryakyn stainless cup mount & holder. But of you want to carry a BIG soda, or BIG coffee, whatever - this is your ticket! Easily snaps on-off, to replace the cup, and can be stored in the trunk/saddlebags, for a quick change when you want to carry some big drinks! Also works well, if you go for an "Italian Ice, or ice cream" to carry home! Looks could be better, but it works, that's all that counts. Four stars for appearance. |
| I had the dealer install this amongst many other things, so I knew it was done right. From some the reviews I read, if it wasn't installed just right, it could crack your fender. So I left it to the pros! It adds some really nice detail to the front, and it keeps the front engine cowl really clean. I installed the chrome lower cowl, and chrome eagle timing cover, so I wanted to keep them looking new & shiny, which is why I bought this and had it installed. So far, it's five stars! |