Contact Us
| One side burned out. No, it wasn't the wiring, it was the LEDs. I like them enough I will probably order them again when I get over my own frustration of having another Kury product failure!!! (think happy thoughts...) |
| In a perfect world the rubber wouldn't get hard and start to break. Lost one that way. Installing was okay if you exercise patience and follow the instructions. After using these for a couple years, I may now need to replace them. Meh. |
| I've tried Dunnies, Avons, Metzs, etc. and these fair a bit above average. Perhaps my perfect tire isn't out there. I like to hit it hard in the twisties and at the correct pressures and temps these seem to flex just a bit. Your experience may differ. Would I purchase again? YES! WingStuff service and prices rock so I'm a happy camper. |
| The Kury trunk handle is the best looking one offered for sale anywhere! Looks and functionality are the best in my opinion of all the manufacturers! The one thing that concerned me was that so many guys mentioned in their review was the fact the the mounting bolts were just to short and longer ones needed to be purchased to complete the mounting process. Never. Made sense to me that this was the case with this accessory considering that it is so well designed by Kuryakyn. During my install I did notice that the bolts appeared to be a little short, but closer examination revealed the problem that many have experienced. It revolves around the rubber gasket that goes between the handle and paint. You will notice that under the handle a recessed area that the gasket HAS to fit into. It not, the gasket holds the handle up to far for the bolts to reach the threads. One bolt on each side WILL reach the threads, start that one first and tighten it down a turn or two, then carefully with the tip of a small screwdriver carefully work the gasket underneath the handle into the recessed area. Once gasket is in place completely under handle base, give the first bolt an other turn or two and this will compress the gasket enough for you to start the second bolt into the threads. After that just snug up the bolts to seat the handle and you are done!! Give the chrome and paint a quick wipe with a polishing cloth and you will love the finished look! |
|
Earlier 9/2012, i wrote: Just got these Sept. Jury still out. Got about 200 miles on them and still letting them wear in. Replaced Metzler Marathons with these. Loved the handle of the Metz!! Wear on Metz were fair. Now: Raising rating to 4.5 stars after about 2500 miles. Still dont handle quite like the Metz's but they feel pretty damn good on the road and I like them so far - especially for the price. Cant beat that. Will see. Just took a little time to get used to. |
| Provides a little more light, just what ever one needs on the rear of a bike. Went together pretty well, did have problems getting the top to screws in the center piece started. Oh well, all can't be fun and games. |
| I bought this Mount for my I Phone so I could Listen to my Music through the Aux plug in the side Faring Pocket. I installed a 12V power plug and and 6Ft extended Aux plug and I could operate the the Phone to pick my playlists and songs. I could also see if I got a call,Text,Etc. NOW I have installed the GL1800 IPod,IPhone Plug-N-Play Interface By Soundgate and Ran the wire for the unit to this Mount. AWESOME |
|
Takes less than a half-hour total, and that includes getting your tools out. The wing looks weird without all lights functioning, and it's also more of a rear attention-grabber! |
|
After installing'progressive springs' everyone said I had to remove the antidive deal. So I did. What a nite/day diff in ride quality. I cant imagine it getting better then this. Easy install. Well worth the money! |
| Very well made. Easy to install. I noticed an improvement as the front end of the bike doesnt feel like such a wet noodle at high or low speeds anymore. But, I feel that there is a draw back. I feel that this piece adds, "Sprung" weight to the front wheel and because of the added weight, there is more feed back through the handle bars. I ultimately decided to keep the brace installed and just get used to the additional feedback. |
| No problems here this oil filter fits just fine and research of the filter say it filters fine too. So why pay more for the honda brand. Save some money and change the oil on time. |
| I put both the front and rear pads on my 2005 wing. The Front pads are very hard pads, the rear are normal pads. Be sure to scuff up your brake rotors before installing. They work just fine but Again the fronts are a very hard pad. |