Contact Us
| This is impossible to put the beads into the valve stem as the instructons say. They would be better off makeing a Starch bag like the truck pouches are made and you just drop it in and the bag disolves and breaks apart. Never the less you have to get the things inside. My friend and I seated the bead on the tire Let all the air back out then Broke one side of the bead and basically squeezed the bottle and poured it into the tire. A mush better way to get it into the tire. As far as the proformance I think it has made a very noticable differance and the tires defentally feel more stable. Of course the roads we have make it dificullt to tell but the vibration is down considderablly. I don't know that I would put this in old used tires once there worn. I installed on both front and rear New tires. So far so good. |
| I thought I had bought all the chrome there was. I had the original chrome covers and the spacers were broke and the thing looked terible. I bought the spacers and then I saw these. They came and were awsome. Took about ten minuts to install both sides and they are better then the original design. Excelent buy |
| I bought this set and ended up purchasing the ten packs individually because I purchased my bike used and they all needed to be replaced. But if you just need a few odds and ends. This would be for you |
| I mounted my spot mirror on the top. It gives you the option to mount on top or bottom. There easy to install nad the hold on great. I like the added view but like the othere reviews I still turn my head but these do help and not too expensive. |
| I purchased 8 of red and yellow. I installed them on the frame on my pull behind trailer and on the tong. Just drill your 1/4 inch hole and Wing nuts to install. Look nice |
| I purchased the Gaskets prior to installing the covers. It turned out the old ones didn't tair the gasket but replaced them anyway. These are easy to insall but still recommeend you replace the gaskets they do not come with the covers. Very nice addition to polished valve covers. |
| Nice Easy to install and fits perfectlly Love the look |
| These add a nice touch to the bike but they are a mean mother-in-law to get on. If you look in the picture you will see that the side next to the tank doesn't sit flush and it is true. But they look great and its hard to notice its not perfectly flush. |
|
THIS IS A GREAT ADD ON PIECE,HOWEVER THE INSTRUCTIONS LEAVE OUT A FEW THINGS.REMOVE THE TAILLIGHT TO GET TO THE MOUNTING BRACKET ON THE BIKE.REMOVE AND SAVE THE LOWER BRACKET OTHER THAN THAT,PRETTY STRAIGHT FORWARD.. DREMMEL OF A SMALL PIECE OF REAR FENDER,AND REINSTALL FENDER. |
| Took about i min. Used a little silicone for insurance. added to a 2012 Wing. |
| This is a nice piece for the front end. This is my second front fender tip. The first one was torn of after someone left a 2x4 in the middle of the road right after sharp curve. I was able to stand the bike straight up, hit the 2x4 and it came across the fender and tore the tip off. No damage to the fender but lost the tip. |
| I installed in about 45 min. There were no rear speakers installed and never were there. I purchased new but don't know why no speakers. So I installed new ones at the same time as replaceing the covers. You have to pull the side pockets to axcess the screws at lease I did so I would also install the wire harness to the speakers. Lookds Great |