Contact Us
| very easy to install really looks nice. takes about 30 minutes to install. |
| These look incredible. Install was easy, just don't overtighten. |
| Love these! They do a great job of making my bike more noticeable to other drivers and adding some light out front. I primarily bought them to be seen by cars. |
|
This is a beautiful drink holder and for that reason I am glad I bought it. Shame on Kuryakyn for selling such an expensive Drink Holder with a bracket that is clearly too short. The Kury design has it resting on top of the right saddlebag when installed in the preferred rear handle position because their bracket is too short. Wouldn't take long for the finish to be affected there. I modified mine and added a 5/8" extender to the bracket so it sits up above it. |
|
Love these grips. They add a nice look, but more importantly so comfortable. Can't recommend them enough. Haven't used the heated grips with them yet, but you have to expect their to be less heat. It is just the nature of the beast and a small sacrifice to get this level of comfort. |
| Installed this with the front springs first and then the Monotube cartridges. If I had my choice I would want it slightly softer for solo riding, but it is perfect for 2-up at 375 pounds. With that in mind it is a huge improvement over the stock one and I would highly recommend it. |
|
This were a great improvement over the stock suspension. I also changed to the rear Progressive Shock Spring. I have since installed the Progressive Monotube Cartridges and that is a considerable improvement over these. |
|
The 30-40 mph wobble is gone. When you see the stock bearings you will know why it wobbled. Too small and cheap. Torqued my bearings to 20 ft lbs. Steered it some and then backed it off. Retorqued to 17 ft pounds and it is perfect. A lot of different opinions on the torque settings, but my steering was too tight when I went higher. It should also be kept in mind that most of our torques wrenches probably differ a bit and most people have never had their wrench re-calibrated after purchasing it. |
|
Installed the Progressive rear spring and the Progressive front fork springs 600 miles ago and it was a wonderful improvement over stock. Wanted to try the Monotube Cartridges so now I can confirm that when both parts are new the Monotubes are definitely smoother. Alot of talk about the Cartridges raising the bike from the Progressive springs, but those must of been older springs that sagged some. My bike did raise in the front when I did the fork springs, but it is the identical height now with the Monotubes. The bike does lean over a bit more on the kickstand and it is okay, but I have a 1/2" plate that I am going to cut and weld onto the bottom of another kickstand I purchased from a trike take-off on ebay. I am 6'0" tall with a 34" inseam and weigh 230 pounds and I ran no spacers in the cartridges. Very happy with how smooth the front end is. In my opinion the bike now handles and rides perfect with my wife on giving us about a 375 pound load. I would prefer the back shock to be slightly softer when I ride solo, but it is way better than the way too soft stock rear spring. |
| Installed this back rest on a friends F6B. The install was easy and back rest work sgood. |
| Finally a GREAT product and support to go with it. These balancers work as advertised and more. With slight cupping I installed these balancers. After about 200 miles my cupping is gone. I never worry about balancing again. Thanks for bringing my smooth ride back. Not a gimmic, just smart idea taht works. A must for the long haul and saving money! |
| Very easy to install took about 15 minutes top. Looks really nice |