Contact Us
| I bought this about two months ago, finally took the time to install and is was easy. Yes you have to drill holes and cut away a very small section of the right passenger storage compartment but it was worth it. It looks factory and the PTT works perfect. My wife has no problem reaching it so the location works that was my first concern but all is well that ends well. Great OEM product from WingStuff and easy to follow installation instructions. All five stars for this one! |
| Installed these on my 08 wing really dresses up the bottom of the bike.Along with the light i put on the bottom of the fender.Wiring wasnt really bad,you do have to take off saddle bag doors,to get to the bolts that hold on the trim piece.As far as drilling the 1/2 inch hole i used a 1/2 inch wood bit this worked perfect.After that just plugged everything up.I did replace the plastic plugs that hold the light up with bolts,cause the plastic plugs broke.You will need silicone to fill the 1/2 inch hole in bottom of saddle bag.Matches my other lights perfect i give these lights 5 stars. |
| These are nice addition to the rear of the bike. You should test try them several times to get the idea of final placement. Tape off certain reference points and stick them on slowly before you put on pressure to make them permanent. They really stand out with matching trunk chrome grills. |
| Lights are very dim until you use the brakes. Called Kuryakyn and they said thats the way they are. Doesn't look right with the saddlebag lights ,LED reflector, and LED license plate all being bright. |
| Good product, easy to fit only problem as found by other customers is that the accessory fuses are too close to the switch unit meaning they end up in the steering well and are then difficult to get at. I was fitting the volt meter in the right hand panel at the same time and so connected the feed wires to the heated grips socket, easier than going through the tank and under the seat and I do not need heated grips in South Africa! |
| Good looking, useful addition and easy to install; just print and follow the PDF instuctions. I liked how the wiring is designed to fit the standard heated grips socket, which is directly under the standard panel, thus making the connecting up of the meter very easy. |
|
Overall the design is moderate and mounting good. Units are versatile in placement options. Downsides are: 1.) Low quality chrome - blistering and corrode easily (I DO NOT ride in wet weather FYI). 2.) Pegs are flat horizontal so not too comfortable. Should angle to match feet-bottom angle like the floor boards can. A very simple design mod to achieve but . . . I guess overall good but with the chrome getting so ugly in 5 months time, it is a shame (or sham). |
| Had these installed by dealer last September when I purchased the bike.I have small hands and thought they would be to large but no issues so far. Had to ride home from dealer in late November,34 degrees, tried the grip heaters and could barely feel any heat thru my heavy gloves,but hardly ever use the grip heaters so no issue...Hope Kury has solved chrome peeling problems on these items as most of their stuff is generally good quality....Time will tell.. |
| I've used other brands on my 2nd bike to try to reduce replacement cost and learned my lesson(s). Can't beat OEM. Also can't beat the price. |
| Run the same Oil (different weights) in both my bikes. Can't beat the smoothness this oil provides. |
| Always loose or damage one over a riding season. Never hurts to have a spare that fits. |
| I didn't really think I would need and that it was only for old guys. But if you have highway pegs, the backrest allows you to stretch out on those long runs. The design also compliments the existing OEM seat. Easy install. Just remember: Measure twice. Cut once. |