Contact Us
| The led fog lights work great. I drive at night to work and the difference was very apparent. Everything is brighter and even street signs reflect with a glow now. Now I do think the daylight running function works well and is visible however I don't believe the turn signals are as bright as they could be. The problem is when your fog lights are on it kinda drowns out the turn signal as its flashing. And then when the fog lights are off usually during the day time they are still a little difficult to see. I feel like brighter yellow LEDs should have been used in that application. But I still give it 5 stars for overall function. Install is what you would imagine it would take you to install it. Try not to install it as the sun is going down like I did unless you like a challenge. |
| First let me say Wingstuff was great customer service and response. Kuryakyn has quality control issues with this product though. First set I had all but last peg on the bike when I discovered the threads on the bracket for the peg were majorly buggered up. Wingstuff promptly provided return and replacement set. Low and behold this set had buggered threads on both brackets 😕 so this time I got a tap and die and re-cut the threads. I think my passengers will like them but rate kuryakyn on this one low due to qc. My first issue with one of their products though. |
| I purchased this drink holder in 2011, it doesn't hold standard drinking cups very well, like the ones from fast food restaurants but it works great for bottled water or similar drinks, it's also a perfect fit for my 21oz insulated water bottle. |
| This does the same thing as the kuryakyn brand, but it keeps the same wing span as the stock handlebars. Easy to install on the 08,just pull the cover straight up. All you got to do is unplug the speakers. Then unplug the dash wires, the hardest part of the whole operation. I took a long skinny screwdriver from the left side, to go under the tab then it will pop free. Then unbolt the handlebars, and loosen the cables. Just bolt it back together. For the plastic cover, use a quarter to mark it and cut it out. If you put the quarter in right place it will fit perfectly. After taking several trips plus a 400 mile day I wished I would of had bought it when I first bought the bike. My shoulders would hurt, my wife would rub them while I drove. Now they feel just as good as when I first get on it. More than well worth the money. |
| These lights look great and add a little more light in the back of the bike. One on my corner lights didn't work and WingStuff replaced it very quickly. I purchase almost all my accessories from them and have always been satisfied . |
| I have been wanting one of these ride off stands for a while thinking it would make it easier to steady the bike upright. So I recently bought one. 1st issue is lack of instructions with the stand. Got the right side hex nut bolt off only after having to go buy larger hex set and trying one by one until I found the one that fit. 2nd issue (again from lack of instructions) I ended up rounding the bolt head on the left side trying to loosen it up. It cost me $60 to find out from a motorcycle tech that the right side had a reverse thread bolt. Would have been nice to know BEFORE I rounded off that bolt head. OK got the Right bolt out and ready to install the ride off stand. After installation, I find the exact same results as pere1543 review. My bike is leaning to the right. The left stand leg is approx. 1/4 inch off the ground with the foot stand shouldering the weight of the left side. The stand would not put my bike up while on the cement floor in my shop as it just slid along the floor. I rolled it back into the ally and tried it again. AGAIN, like pere1543, my reverse gear began slipping and would not pick up the bike. I called Wingstuff to express my dissatisfaction. Was told to call the manufacturer. I was given a phone #. I called 4 times in a 2 hour period and got a busy signal each and every time. Now, I am not an engineer, but if you have several people expressing the exact same problems, there is something wrong. WINGSTUFF, I will be contacting you so we can work something out. AS for a rating, can I give it a 0/5.!!!!! |
|
I just returned from a 3500 mile trip from Colorado to Cali and back. The rear E4 handled wonderfully. I did not put the front E4 on the bike thinking my old E3 could make the trip. On the way to Cali I had 5 hours of crosswind in Wyoming and cupped the right side of the E3 on the front. So, even though I have a new front E4 in my garage, I had to put one on in Cali. NOT HAPPY! With only 500 miles on the front tire I hit the grooved cement on I 80 and the E4 was trying to find a track. If you don't like the classic wing wobble, you really are not going to like the E4 on the front. I was going 70 when it started, slowed quickly, but could not find any speed that remedied the problem. When I hit a buffeting wind in Salt Lake City the next day it made the ride real interesting on the grooved cement. Different speeds, temperatures, states, it is all the same with the E4 on grooved cement. Talking to the service manager at my authorized Honda shop while it was in for a rear brake recall he stated many are having this same experience. I have read other reviews from riders who say they are not. |
| These pegs fit good, feel good, and look good.. But, as time goes on the black paint on mine has faded from the heat of the motor and now have a purple tint to them. My bike is blacked out and these fit the look of the bike real well. Installation was a breeze. |
| I gave this product 1 star only because the scale doesn't go any lower. glue didn't extend past the part and wouldn't make contact with the fairing. Also is very cheaply made. I will be asking for a refund. |
|
The cup holder fits well, and looks good. The instructions are a mystery. The product includes two shim washers and a 5/8 lock washer, but the instructions never show or tell where to use them. I used the lock washer between the bolt head and mount, but it was just a good guess. Read the instruction PDF, you'll see what I mean. I never like having pieces left over. |
|
The position of these are ideal for my passenger and they fold up out of the way nicely. I subtract one star because Kuyakin does not properly prep them for installation. Threaded holes need to be chased with a tap because debris and metal plating residue will cause the set screw to jam, and make attaching the pegs difficult. |
| I love my Bridgestone's! First set I got over 14,000 miles on them ,came on the new 2015. second set at 7000 miles cupping cupping cupping. ? Why? I want to buy more Bridgestone's but I may have to try the new Dunlop. Seven years, 100,000 miles, I buy a lot of tires |