Contact Us
| Sorry, I meant to give 1 star. |
| I like that it folds up and out of the way. There's not of space for a cup holder on an 1800. Now for the bad. It swings. If your cup is short, and I mean SHORT, you will not have a problem but an average height stainless could turn upside-down. The jaws that hold the cup open easily and open wide enough that your cup could fall out. I found I was concentrating on keeping my cup from falling out I was paying enough attention on the road. I am going to try to fix these serious design flaws. Maybe securing it so it doesn't swing and adhesive lined heat shrink to keep the jaws from opening. |
| This thing really sets up there. Then if you get the risers to distribute the load, that add even more height. Wish I would have gotten the black Show Chome instead. |
| I put this on with the new fender rail on my 2005. The day I did it I loved it. The next day I wasn't so sure. It'll ride with me for a bit till it bugs me to the point I take it off or I admit it looks cool. Wife digs it. That pretty much seals the deal....it IS cool though.... |
| That is, hold a couple 12v plugs and hold 1 or 2 cell phones while charging. I bought a 12v splitter where I had 2 12v plugs and wanted to wire them in, but wanted them up in the lid and not down in the trunk area. Didn't want to spend the money on one of the more expensive brands, if I was going to cut on it, modify, etc. The simplicity of the Wingstuff version sold me on it. I knew going it, that the provided longer screws were questionable, or quite possibly, damaging to the outer painted panel. So, being somewhat OCD, I did some searching and found a thread where a particular type screw was listed along with 3 part numbers of various lengths. One, was the OEM screw for the trunk lid under panel at 12mm. Another, the 93903-25380 was listed at 18mm long. They all had the same thread pitch, so I was excited to not tear up the plastic with too long, wrong pitched screws. The best part? Your local Honda CAR dealer's list price is around $0.58 cents each. My local dealer had them the next day. Had to elongate the lower holes in the organizer quite a bit for the mounting holes to line up. But once that was done, the new Honda screws mounted it perfectly. For around $3 (wholesale), Wingstuff should really start including a better screw. Nobody will care (or notice) if the organizer is $28, when all the others are $45 or more. But they'll notice if the end pokes through the paint. Plus it just feels good to put the same thread pitch screw back in the plastic hole. 5 stars for value, 4 stars for fitment, 3 stars for the hardware. |
| The slip tubes are a nightmare. I was once a fair mechanic but I gave up. I'm going to pay someone to install these mufflers. I spend a few hours trying to get the right angle for the slip tubes but couldn't. It would have been nice if there were some kind of alignment makes or have the slip tube permanently attached. I was not happy! |
|
I must have received Maurice's returned Pipes!! They have a 4" long piece of bent pipe that goes between bike and muffler. Slip in fit is so tight that once you get the pipe in you can't turn it to get muffler straight with bike or line up hanger bolt. Pipes had scratches and touch u-p paint. Bent pipe chisel marks where someone removed. POOR QUALITY CONTROLL As the left pipe fit well. Sadly DISAPPOINTED Gary NC. |
| On the face these look and seem excellent. The turn signals, driving, and fog lights are a great idea and do look good once installed. However this is a poorly made product. I followed the instructions exact. The right fog light doesn't work. I verified this by checking the power source right to the light. The bulb is dead which I understand happens and hopefully they will replace it soon. After I reinstalled the light from checking for power one of the bolts of the right side bracket broke off and is now stuck inside my wing. This was just from using a regular hand tightened socket wrench. Also, the connection for the turn signal on the right side had problems. One of the wires kept coming out of the connector which caused another reinstall to correct the issue. If there was just one issue I would understand but after 3 separate things I can say it's a poorly made product. I would not purchase this again and should have paid the extra to get the Pathfinder lights instead. |
| Manufacturing defect, sending it back. My first order from WingStuff, not an auspicious start.... |
| Let's start with the good, armrests look great. The bad, everything else. The design and fit of these armrests are the worst goldwing design yet. The angles are way off for a 2016 model and design requires 4 - 1/4x20 bolts to support the weight on very thin plastic. This will break the trunk lid and speaker plastic even without a passenger ever using it. The other brands back the plastic on the back side with metal supporting brackets. It seems like they cared about Esthetics on the arms only as the carrier bracket is crude and poorly designed. This piece is painted black and paint is falling off exposing rusty metal. Speaking of metal, they over compensated for support by making this bracket so thick that the back rest fits terrible and leaves huge gaps between trunk and back rest. I might try Honda one next. |
| Like everyone is saying. Patience putting them in is the key. Front is harder to get in. Opening and closing is different Needs firmer closing and slight downward pressure when opening. You get the feel what it takes to open and close. Haven't had thenm in that long but seems to do what they are supposed to. |
| AS the other reviews say, this is great. Get it. |