Contact Us
|
Was putting them on a 2018 Goldwing. I watched all the videos, read all the reviews, so I had a good idea what to expect. I cleaned out the holes, used zip-ties to squeeze them together, made sure the tabs engaged etc. etc. Got the first grip on, the metal shell over it, all the rubber pulled up through the holes, made sure all the holes lined up and gingerly put in the first 2 screws finger-tight. So far so good. Then went to do the end cap, verified the holes still lined up, and gingerly went to put in a screw. It met a slight bit of resistance so I took it back out and re-verified the holes lined up. Tried again and same thing. So I applied a little more pressure and the head broke off. I thought "Damn! Well, I can live with 3 since these look so cool." And..... tried a different hole and exact same thing happened. We're talking very little resistance and no, I wasn't cross-threading them or anything. Come on... how are they supposed to go in, by wishing? Absolutely ridiculous. So that was that, I immediately pulled it back off and basically lit $91 on fire because Wingstuff won't take it back unless it's still in unopened packaging. Obviously some people DO get these on without a hitch, but trust your instincts when you see so many people saying they had problems. These are simply not ready for prime-time in their manufacturing, too many variables and beyond cheap/shoddy screws and pre-drilling. You *might* get a well-made set, but then again... you might get mine. |
| I bought these at WD40 because they were including the wiring kit free of charge. The horns was a direct replacement for the OEM horns on my 2012. However, the OEM horn bracket on the right side of the bike did not allow me to access the bracket nut due to there not being enough clearance between it and the header pipe, so I simply removed the horn from the OEM bracket and reused it to mount the new horn. The left side had no such problem, so I replaced the OEM horn and bracket with the supplied new bracket. Other than that, the instructions were straight forward. These horns are LOUD! |
| I happened onto this product by accident as the vendor was out of a similar product from a different manufacture.This is a top quality product using top quality parts. I was considering replacing my handlebars to alleviate the discomfort in my neck and shoulders I would experience on long rides, so i bought the standard kit that would raise, move the bars towards me and most importantly, move the grips in. This product nailed it while saving me HUNDREDS of dollars over new bars! It requires you to cut the triple tree plastic cover (as do all similar kits), but they include bolt head covers/plugs to dress up and provide protection against the elements. I think anyone who typically are not afraid to work on their Wing can install these in about 2-hours. This kit has changed my ergonomic fit on my bike (6',2") where i can now enjoy pain free riding. It even created better legroom too. |
| Just installed the wiring kit for running and brake light on the spoiler, wow what a difference (can you see me now). easy to install, would recommend this hookup because of adjustment for light itself, instructions were well written, also phone # for help if needed. |
| I added this onto my 2016 F6B earlier this summer, just before an extended 2,500mi trip around Lake Michigan. The wings not only helped with deflecting wind (hot & cold), it also allowed me to get some cooler air when the temperatures started climbing. There were a couple of days where it reached 96 degrees and I opened the wings straight forward and allowed just a little wind come by in leiu of none. I love them and they were an easy install. |
| Added this item to my 2016 F6B. Instructions were simple enough to follow along and I completed the job in under 45min. One additional item to add is to wrap electrical tape around your connections and protect any bare wiring. |
|
I purchase these to go along with my glossy black hiway pegs and my glossy black Floorboard and heal toe shifter. It make for a.nice clean look and a bonus the bride looks them |
|
I installed these on my 2016 Goldwing I went the glossy black to go along with the black out look on my Goldwing I have gotten plenty of complaints |
| Am researching travel bags for the back of the new goldwing. Just spoke with customer service at Kuryakyn - they said that they don't have any ideal fits for the 2018+ goldwings (that inludes both the Momentum and XKursion lines). Maybe it'll work, but Kuryakyn itself doesn't have confidence in that. |
| Item was shipped quickly and arrived in good condition. As usual, the directions were poorly written and tough to understand...pictures didn't help too much. The install took me about 2 hours and the backrest sits almost as high as my old backrest on my 2006 wing. It looks OK (not as good as the Honda factory one) and is high enough to provide good support. I wish more of the parts were chrome or black since the bracket can be seen. We'll see how it holds up over time. For the price, I would recommend it. Tip - The 4 "T" washers will require tape to hold them in place during install. |
| I always wanted a little gold in this area. the Honda Cylinder Head Set did that. Not to much and not to little. Nice touch to engine |
|
This LED Brake light gives you added safety with the extra lighting. It's Bright. Only gripe I have is, it does not provide a running or turn signal option. This is either ON or off. The black plastic it mounts to offers a great place to aid in opening the trunk without marking the trunk or chrome rack up with fingerprints. |