GL1800 Trailer Hitch Bushtec V2 Goldwing Trailer Hitches

Introducing the Second Generation Bushtec V.2 Vertical Receiver Hitch for the GL1800 FEATURING Removable Center Section.

Average rating of (24 reviews)

Goldwing Trailer Hitches & Accessories at Wingstuff.com

We have test fit the BUSHTEC GL1800 V.2 Vertical Receiver Hitch to a 2006 GL1800 with Comfort & Audio Packages and the Bushtec V.2 GL1800 Vertical Receiver Hitch fits all GL1800 thru 2006 without modification, including electrical.

The hitch design retains the original 4 point mainframe attachment layout with subframe integration, while adding the versatility of a removable center section. The rear tire can be removed with the motorcycle on the center stand by simply removing four bolts.

The Bushtec Vertical Receiver Hitch system is supplied with the Electronic Relay Isolator Package to protect the sophisticated electronics of the GL1800s EFI and ABS braking system (if applicable). The Bushtec Vertical Receiver Hitch for GL1800 is available with EITHER a 1 7/8 inch Stainless Steel ball coupler OR Bushtecs own Heim Joint & Positive Displacement Pin connection w/Stainless Steel lock.

V.2 DELUXE PACKAGE - Includes Vertical Receiver Hitch package & main supports, center section, struts, graded hardware, Chrome Hitch head with EITHER a Bushtec Hitch Pin & Stainless Steel Lock
OR 1 7/8 inch Stainless Steel ball, Plug-N-Play Electronic Relay Isolator Package, & Receiver Lock PLUS the Bushtec Contoured Mudflap, Mudflap Mounting Bracket, and hardware. $399.00

V.2 STANDARD PACKAGE - Vertical Receiver Hitch package with main supports, center section, struts, graded hardware, Chrome Hitch head with EITHER a Bushtec Hitch Pin & Stainless Steel Lock
OR 1 7/8 inch Stainless Steel ball, Plug-N-Play Electronic Relay Isolator Package, & Receiver Lock. $350.00

V.2 BASIC PACKAGE - Fits model years 2001 thru 2004 GL1800. Consists of V.2 Bushtec Vertical Receiver Hitch with removable center section, graded hardware, chrome hitch head with chrome 1 7/8 inch ball, vertical head pin & hairclip, plug-in non-isolating harness. $279.00

Product Reviews

Click here to add your own product review

	3/15/2010 reviewer: Michael Rating: Easy installation except for the one nut on the right side behind the passenger floor board, no easy way to put it on. Be sure to use locktite since there is not enoughd thread for a lock washer. The only other disappointment (not Wingstuff fault, or Bushtec) is no plug on the harness. Just need to find one to fit my Rover!!!
	2/13/2010 reviewer: Thomas Rating: GREAT hitch. Bushtec quality shines through again. I installed it myself. very good instructions came with it. Took me about 3.0 hours to complete. The supplied wiring harnesses are plug and play, and added bonus in my opinion.
	8/28/2009 reviewer: Kurt Sanders Rating: Outstanding manufactured hitch, more expensive than most other alternatives at Wingstuff. But for securely pulling a MC trailer that costs thousands of dollars or a Pakit(tm) rack system, this is the hitch for you. Knowing that this is tightly manufactured to the exact specifications of the GL1800 frame assured me that I would not have to muscle it into place, like the other lower cost hitches I considered with reviews. The only issue I had was the GL18000 mount on the right side of the bike being so narrow that you have to work hard to tighten the bolt with special effort. Swing the muffler out of place as they suggest on this side, the left side has plenty of space. Install time for a novice going slowly to make sure this was installed correctly, 3 hours.
	6/29/2009 reviewer: Greg Rating: After reading reviews on all the different hitches and looking at how and were they attached to the frame. I felt this was the best choice. I bought the Basic version and purchased the receiver lock and trailer isolation relay separately. Took 2 hours to install. You don't need to loosen your mufflers like the instructions say. Hitch attaches to the main frame in 4 places and sub frame in 2. Most other hitches only have 2 attachments to main frame leaving the saddlebag sub frame to carry the load.
	5/22/2009 reviewer: Greg Rating: Bought the middle kit with the isolator relay. Hitch: Great design. It is robust. Installed it myself. I hate having to get out both the english and metric tools. Its a metric bike. Bushtec should use metric fasteners. The isolator relay included in the kit (by Electrical Connection?)came with butt connectors and loop connectors. All were the wrong size (too small for the wire gauge) The dumbest thing Bushtec does is to provide color instructions with NO photos. Not even a photo of the product. They could a include a CD for about 2 bucks...Dumb.

Read ALL reviews for this product