Kuryakyn GL1800 Fork Brace With New Chrome Dust Covers

Installed AK20 Traxxion front end, the Kuryakyn Fork Brace, and All Balls at the same time. The perfect Trifacta! The "dust covers" are cheesy plastic stick on's. For the money, you would expect better, but.....Significant and noticable improvement in handling, especially at slow speeds. Absolutely NO Front end wobble at any speeds, and my Elite 3 front tire is getting great milage with no cupping or other abnormal wear. Going with all three at the same time was expensive, but well worth it in my opinion.

I installed this brace on by bike and have noticed some improvement in the handling when it comes to cornering. It is stiffer and more precise. Not much difference in the straight road handling. Overall, I feel this was a good investment.

Just put the All Balls Steering Head bearings in on my GL1800. Installation is easy enough to do at home with common tools, hammer, brass drift pin, and patience. While my forks were removed, I installed the stiffer Traxxion Dynmamics fork springs, and upon reinstallation, I installed the Kuryakyn Fork Brace and it’s redesigned Chrome Dust Covers. Everything went together really well, and both my high speed and low speed handling is now razor sharp. Though I have stated my handling is vastly improved, I am very hesitant to say that the infamous front-end wobble is cured. My thirty-plus years of riding experience tell me differently. A quick look at available front tire tread patterns (any brand), along with the knowledge that any tire I put on will eventually cup in it’s normal wear cycle suggests to me that front-end deceleration wobble will come and go. I believe this wobble is related to tire wear, the composition of the rubber in the tire, and the frequency of replacements, i.e.; the softer the rubber, the faster the tire wears, and the sooner deceleration wobble is experienced. In my opinion, we can do many things to vastly improve the overall handling of the GoldWing, (front/rear suspension upgrades, tapered steering bearings, fork braces, and tire selection/replacement) but will not overcome the physical properties that are at play while riding one.

Keep both hands on the bars!! :)

Very easy installation, and did stiffen up the feel and turning…It looks very nice even with out the dust covers, I had to wait for the dust covers while wingstuff fixed the attachment problem, but the covers just came today, but I haven’t installed them as of this post.
Excellent product, and I can’t figure why Honda doesn’t put these on all Glodwings as a factory item…