114 Member Reviews
1 Star: 5
2 Stars: 2
3 Stars: 4
4 Stars: 6
5 Stars: 97
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.28.2010
4 Stars
Just had new tires installed 400 miles ago. I was talking to my Wing mechanic about a slight vibration I was noticing and he mentioned a lot of riders were using these Dyna Beads with great results. So I ordered the 2) 2oz kit with installation bottle from WingStuff. When it arrived I read the instructions and proceeded to install them. First thing I noticed was that the installation tube needed to be stretched ever so slightly to help with the fitment onto the valve stem. So, I took a round shaft Phillips screwdriver that was a little tight and pushed it into the tube. That relaxed the tube opening just enough to allow the tube to slip easily onto the valve stem. I then started to squeeze the bottle to get the beads to flow. That's when I realized there had to be a faster way. So, I called my co-rider (wife) out to the garage and asked her to continuously tap on the valve stem body from the opposite side of the wheel. Wow! What a difference. The beads just rolled out of the bottle and in about 1-2 minutes tops we were done. Next came the test ride and I must admit the slight vibration was no longer there as long as I kept both hands on the handlebars. I do however still have the "Goldwing Wobble" if I take one hand off the handlebars at about 30-35 mph. That still frustrates me so I'll keep taking the advise I read of always riding with both hands on the handlebars at all times. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.13.2010
5 Stars
wow!! for the first i had the tire guy to put mine in on install. took it out today and no vibration at 0-90 , it is hooked up. i am soled on them |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.09.2010
5 Stars
Excellent product! I can't believe how well the beads have performed. The thing I like best is that beads respond to changes in the tire as it wears. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
01.07.2010
5 Stars
Great product..... Balance your tires through their life. If you purchase a longer plastic hose from your local hardware store you can pour the beads in and than use low pressure air to effectively "Blast" them into your tire. I've found average installation time to be |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
01.07.2010
5 Stars
Had a new Cobra added to my front and added the Dyna Beads. Wow no Goldwing wobble at 35 anymore smother driveing I am impressed. I drive a lot and notice a lot. I have a 07 with 40,000 on it and know my bike. The Dyna beads are doing what was said about them. Installed them with the tire installation. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.22.2009
5 Stars
I have found the Dyna beads to ease the ride. It took me much longer to install them than I had envisioned - if you are very patient and let the beads roll down the tube in a thin trickle - they will. Take the valve out of the stem - fill up the applicator bottle = attach the filler tube and gradually pour the beads down the tube - don't let the beads back up - pour slow and they'll go!!! You may occasionally have to tap the tube if they start to back up. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.13.2009
5 Stars
Like many, I was skeptical at first and wondered if this was nothing more than snake oil. Either the new Dunlop E3 Radials and rims are perfectly balanced or the beads work. No vibration was felt from zero to highway speeds. Installation through the valve stem is simple if you allow beads to go in slowly while tapping the valve stem. They work for me and I recommend them. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.10.2009
5 Stars
I put these in new stones after they were mounted, no problems putting them in.Much smoother ride, with no wobble.1st wife even commented on the smooth ride,passed the test:-) |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.09.2009
5 Stars
I got my new Avon Cobra from Wingstuff and had it installed. Was planing on putting the Dyna Beads threw the stem but that was a no go I beleave they have to be put in the tire with installation. I took out the little insert & let the air out of the tire & put the tube in the tire stem but they would not fall in. Tryed to blow them in also but that did not work so now I will have to wait until I do work on the tire of get a new one. Wish the instruction said they need to be put inside the tire at installation. I recomend putting them in at installation. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
10.02.2009
5 Stars
So here it is: Shinko tires and Dyna Beads. Either the Shinkos came out perfectly balanced or the Dyna Beads work like magic. You can work that out for yourself, but I know where my money goes. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
09.21.2009
5 Stars
I've had the famous 1800 "wobble" from the FIRST day I purchased my new 2008 GoldWing.Now with only 9,000 miles on the original Dunlops they were wore and cupped enough that I decided to change them out before we left on our 3,000 mile vacation. I ordered the Bridgestone's from WingStuff and after doing a lot of research on the DynaBeads thought I'd try them.All I can say is "WOW"!!!Just got back from our trip and the bike never had the wobble ONCE!!(I know this hard to believe-I was amazed myself--I had to keep looking to see if I was on the right bike as I had the wobble for so long I actually got used to it.)All kidding aside I'm convinced the DynaBeads are the cheapest BEST investment that you can buy to go with a new set of tires.The ride even seems "smoother" and I've checked after our trip and both tires are not showing ANY signs of cupping.(Also,unlike the one review I haven't heard anything from any "noise" the beads are making.)I'm ordering more DynaBeads right now so I have them on hand when I need new tires again.If any of you have any questions I'd be glad to answer them-safe riding |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
09.01.2009
1 Stars
Put the dynabeads in a new stone on the front and a new Kuhmo, 2oz in the front & 3oz in the back of the gl1800. Ran front tire at 40lbs and rear at 34lbs. Front cupped just like it did on the last one, and both tires hopped badly at high speed. My friend used them too, and it appears that they work well if your tire needs no more than 1/4 oz. Tires that need more weight don't balance very well with them. Just replaced my tires w/new ones, used balancer this time...OK to 130mph. |