114 Member Reviews
1 Star: 5
2 Stars: 2
3 Stars: 4
4 Stars: 6
5 Stars: 97
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
04.29.2010
5 Stars
Installed into tires about 1000 miles ago, I was not sure about these when I got them, but I will have to say that I have noticed a differance in the ride, every bump feels smoother so my buddy bought them and he agrees with me on this. It's a weird feeling of smoothness, so I do feel that the beads are worth the money. My only complaint is that the tube they send you is a little short and the beads did not want to go in the valve stems. The cure is load beads in tube and hit with air and they will go right in the stem, using a vibration tool as the instructions suggested was worthless, did not work. Use air and you will be done in about 2 minutes per wheel. I will review again after my trip next month, will be doing around 4500 mile ride so we will see if they help with cupping or not as I have heard... Another review to follow |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
04.18.2010
5 Stars
I only have 1500 miles on these .they seem to work I dont feel any problems..We will see what they do for tire life |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.28.2010
4 Stars
Just had new tires installed 400 miles ago. I was talking to my Wing mechanic about a slight vibration I was noticing and he mentioned a lot of riders were using these Dyna Beads with great results. So I ordered the 2) 2oz kit with installation bottle from WingStuff. When it arrived I read the instructions and proceeded to install them. First thing I noticed was that the installation tube needed to be stretched ever so slightly to help with the fitment onto the valve stem. So, I took a round shaft Phillips screwdriver that was a little tight and pushed it into the tube. That relaxed the tube opening just enough to allow the tube to slip easily onto the valve stem. I then started to squeeze the bottle to get the beads to flow. That's when I realized there had to be a faster way. So, I called my co-rider (wife) out to the garage and asked her to continuously tap on the valve stem body from the opposite side of the wheel. Wow! What a difference. The beads just rolled out of the bottle and in about 1-2 minutes tops we were done. Next came the test ride and I must admit the slight vibration was no longer there as long as I kept both hands on the handlebars. I do however still have the "Goldwing Wobble" if I take one hand off the handlebars at about 30-35 mph. That still frustrates me so I'll keep taking the advise I read of always riding with both hands on the handlebars at all times. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.13.2010
5 Stars
wow!! for the first i had the tire guy to put mine in on install. took it out today and no vibration at 0-90 , it is hooked up. i am soled on them |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
03.09.2010
5 Stars
Excellent product! I can't believe how well the beads have performed. The thing I like best is that beads respond to changes in the tire as it wears. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
01.07.2010
5 Stars
Great product..... Balance your tires through their life. If you purchase a longer plastic hose from your local hardware store you can pour the beads in and than use low pressure air to effectively "Blast" them into your tire. I've found average installation time to be |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
01.07.2010
5 Stars
Had a new Cobra added to my front and added the Dyna Beads. Wow no Goldwing wobble at 35 anymore smother driveing I am impressed. I drive a lot and notice a lot. I have a 07 with 40,000 on it and know my bike. The Dyna beads are doing what was said about them. Installed them with the tire installation. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.22.2009
5 Stars
I have found the Dyna beads to ease the ride. It took me much longer to install them than I had envisioned - if you are very patient and let the beads roll down the tube in a thin trickle - they will. Take the valve out of the stem - fill up the applicator bottle = attach the filler tube and gradually pour the beads down the tube - don't let the beads back up - pour slow and they'll go!!! You may occasionally have to tap the tube if they start to back up. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.13.2009
5 Stars
Like many, I was skeptical at first and wondered if this was nothing more than snake oil. Either the new Dunlop E3 Radials and rims are perfectly balanced or the beads work. No vibration was felt from zero to highway speeds. Installation through the valve stem is simple if you allow beads to go in slowly while tapping the valve stem. They work for me and I recommend them. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.10.2009
5 Stars
I put these in new stones after they were mounted, no problems putting them in.Much smoother ride, with no wobble.1st wife even commented on the smooth ride,passed the test:-) |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
11.09.2009
5 Stars
I got my new Avon Cobra from Wingstuff and had it installed. Was planing on putting the Dyna Beads threw the stem but that was a no go I beleave they have to be put in the tire with installation. I took out the little insert & let the air out of the tire & put the tube in the tire stem but they would not fall in. Tryed to blow them in also but that did not work so now I will have to wait until I do work on the tire of get a new one. Wish the instruction said they need to be put inside the tire at installation. I recomend putting them in at installation. |
Motorcycle Tire Ceramic Balancing Beads
ITEM CODE: PG27738
10.02.2009
5 Stars
So here it is: Shinko tires and Dyna Beads. Either the Shinkos came out perfectly balanced or the Dyna Beads work like magic. You can work that out for yourself, but I know where my money goes. |