Contact Us
| Looks much better that the cheesy grey....what's with the little piece of (stock) plastic on the frame that makes the frame looks like a cheap slip on tent pole style joint? I'm not chrome crazy but these make a huge difference in the look. |
| Goes perfectly with the Hondaline chrome cowl....that cheap grey plastic needs to go! Very easy to install but hard to leave the bike sit for 12 hours after installing it. |
| Great hitch and very easy to install IF you ask CWOLAW for his most excellent picture and instructions. I was able to complete this installation in about an hour. Thank you CWOLAW...your awesome. |
| I've been using this product for several years. Good to only have one product to do all of the jobs. Excellent job on seats and black plastics. Doesn't leave them slick like other products do. |
| Stricking add on, and what else Chrome!! Does not use 3M adhesive but instead uses silicone. Requires 12hrs wait time after install. While applying the silicone recommend using a flexiable applicator to spread the gel over the required interior of the grill. Also use a clean soft cloth while attaching the grill to protect the finish. You will be using tie supplied tie straps to hold the grill against the area. have some soft strips of material to place against the grill finish and tie straps. |
| Easy install, make sure you have access to allen wrenches to tighten down securing nut. |
| Easy install and looks real good, adds the slight difference from the OEM pipes. |
| Like hammer I found the floorboards a but narrow even for a footsize of nine. I can't get use to pegs and toe shifters to use to riding Yamaha STAR bikes for years. A bit hard to get a good feel for the front shifter and not to found of the break, always gives me a feeling I am not getting back pressure from the rear break. I may adjust the review after driving it a bit longer. |
| Quickest and easiest chrome you can add to the front of the bike. Looks great and it helps break up the empty scoop area. |
| Can't add more to the rest of the reviews other than its more chrome. I recommend using a clean soft cloth when applying it of the fender. Pre-place it without sticking to ensure you have an even placement before attaching. |
| Adds a nice touch to the fender. easy to install. I recommend you test placement prior to taking the adhesive tape cover off so you can get a clear site and placement prior to sticking it. Use a clean soft rag to help you press agains the tip while sticking it to the fender, help protects the tip and the paint finish as you press down. |
| I bought the Kury floorboards and new wider kickstand. Purchased the extender based on the recommendation from WingStuff. If you plan to add floorboards you will need an extender as the boads will cover any kickstand OEM or otherwise. The extender will protude from under the floorboard. This may bother some when stopped at a light as you may catch it as you put your foot down. It was easy to install (nuts and bolts) I gave it 3 Stars because of the potential of catching it while placing your foot down at a stop. |