Contact Us
| These are fairly easy to install. Removing OEM pegs is simple, just pull out cotter pin and push out the large pin that holds it all together. You can reuse the original cotter pin but I installed new ones. The only pain installing the new boards is getting the spring back into the hole in the frame. I used a hook ended tool to pry up the end of the spring while you get it lined up and push the whole unit in. I set the large pin in the top of the hole before doing this so when it lined up you could just push it in and not have to fish around for it. My only complaint is that the driver adapter on the right side was too narrow to put the spring into. I don't know if it was slightly bent or there was too much powder coating on it but I had to really force the spring into it. Left side was fine. This is the reason for the 4 stars. Otherwise I am very happy with these boards. They are very nice looking. |
| Fairly easy to install. The first step is Remove screw from brake hose joint (screw will not be re-used) This screw is not a Hex Head, it is a T30 Torx (or Star) bolt. The pinch bolts are 10 mm. Its been a few days since I installed these, I believe all the hex heads are 3mm. Look very nice on bike. I chose to remove the center plate to expose the reflector. They look good either way. |
| 1st purchase made from wingstuff. Very nice product. Easy to install. Like the way it looks on the bike. |
| Like every product from this manufacturer -quality! My passenger reports they’re comfortable. I like the look it gives to my ‘16 GL1800. |
| Grips you devise tightly and securely. Let’s you adjust to an angle that’s easy to see. |
| I just had these installed with a new set of E4's. My bike has never felt so good! The front end feels super solid and stable. At any speed and in the corners, there is no wobble in the handle bars. I am hoping they keep my tires from cupping and extend the life of my tires by 30 or 40%. They are a little pricey, but I will give them two thumbs up! |
| Awesome phone holder |
| I put them on the bike they look great |
| these were easy to install, plug and play , fit perfectly. the sound is much better than the originally ones. now I can here my music as I drive down the highway clearly without having to blast the station. |
| It is unfortunate that I had to give this product a 1 at this stage as I was so looking forward to installing this on my bike. However, it would be great if Honda and also the sellers of this product could make mention that it WILL NOT FIT a 2018/19/20 U model Goldwing. U model Goldwings are the ones that are made for Australasia - they do not have a plug to plug this unit into so unfortunately this unit is of no use to me. It will only fit European and American models. This goes also for the CB system for these bikes (same problem). If I can get it going then I will write another review but it will be at my cost to find all the wires necessary to make this work as Honda will not come to the party in this part of the world. Very disappointed with HONDA for being left out to dry on this one. |
| Great product - definately makes putting on centrestand a whole lot easier. Seen too many of my friends suffer with strains to tendons trying to lift bike onto stand. This takes all the effort out and works extremely well. |
| Love it so easy to install a must have |
