Contact Us
| This is an easy install. Just make sure you have the proper connector to hook to the trailer since it doesn't come with one. I used a 6 pin connector and had it ahead of time. |
| Just got this in and installed on the bike. Easy install, plug and play. Paired it with the 20S EVO and look mom no wires! The goldwing system does plug into the freewire, but after that everything is wireless to the headset. |
| Kształt -super, sztywność - wolałbym sztywniejszą, oryginalna jest prawidłowo odchylona od deflektorów, F4 dotykała deflektorów, ryzyko porysowania ! Trzeba było próbować różnych podkładek gumowych by odstęp był akceptowany .Zastanawia mnie dlaczego nikt o tym nie piszę , może ja nie dostałem odpowiednich podkładek? (Shape - great, stiffness - I would prefer stiffer, the original is correctly deflected from the deflectors, F4 touched the deflectors, risk of scratches! You had to try different rubber pads for the gap to be accepted. I wonder why no one is writing about it, maybe I didn't get the proper pads?) |
| Just finished a 1000 ride with these. Work great & really helps to stretch out. I'm not too mechanically inclined so the install was tricky for me. Took a couple hours on one side; the other side went much quicker. Written instructions are near useless. The video is more helpful but I wish it was a little more complete. Took awhile to adjust both pegs to the same position & find one that I liked. Nice to have that adjustability though. |
| The LED's are a welcome upgrade to my F6B. I previously ran high output halogen bulbs which were a good improvement over stock. However, my experience was they last about seven thousand miles before burning out. So, my real concern here will be how long the LED's will last?? One gentleman on here said he has had the Pathfinder LED's for over 10K. I guess I will have to report back when they expire. In closing, the Pathfinders are well worth the initial investment, let's just keep an eye on the longevity piece. |
| They look great ! Very easy to put on |
| If you are a rider that wants to be seen, these are some lights you want to have.Many of my fellow Goldwinger's have ask about these light. They are definitely eye catching. (and we all know it is about not getting run over by a inattentive 4 wheeler.Though I looked at the Cruiseman install video multiple times, I did take a slightly different tactic on the install.. Overall a much cleaner install, even though it takes a bit more time. (personal preference for sure)I highly recommend the unit.. I have been advised that some states only allow 4 white lights on the front of a vehicle. |
| Both my wife and myself have a 2018 Goldwing with these lights installed. Both were installed following the video from Cruiseman as well as Big Bikes' installation guide. On BOTH of our bikes the right hand wire developed a short in the place where the wire feeds from the fork to the bike. Almost appeared as though turning the bikes' forks over time caused the short in the wire to develop. I really like the lights but they have some quality issues. If this problem occurs again I'll move on to a different brand. |
| Great cover! If it lasts as long as my Wingstuff half cover did it will outlast me! Easy to put on by yourself if you start at the front end and keep the zipper closed. It will probably take 2 people to fold it up and get it back in the carry bag. Wingstuff you rock👍 |
| Instructions were clear and for the most part the pictures were clear enough to see the angles of the different brackets. Went together easy and looks good. The patch they give you that the bracket goes thru the seat looks good now, i believe that with time the ends will turn up and not look so hot.For now i am really satisfied with the look and the product. |
| These work great, and seem to be much less likely to fail than the stock stems. I am well please with these valve stems. Keep up the good work on your product line. |
| As the other review stated the link and QR code to the installation instructions is just to the accessories catalog. Useless! The quality of the product is very good when you sort out the install/assembly issues. About the right size to not interfere with foot controls. These will work best if your boots have a heel. If the sole is flat bottomed you really won't get full advantage of the extra part of the "foot board". A bit of soapy water will get the parts to slide together easy. The bracket that goes in the rubber part needs to have the extra hole facing in towards the pivot . The supplied acorn bolts are the "feelers" and I suggest using low strength locktite or Vibratite. The 2 bolts that hold everything together have a dry locktite on them so just run them in and nip them down. The pivot pins are held in with cotter pins. Easy to do and the spring won't fight you like some bikes will. Beginning to end took 20 min because I had to sort which way the inner bracket went. |
