Contact Us
| Very , very, easy to install. Looks great black finish, matches bike perfectly. Solid feel when deployed on ground. |
| Easy install and is a must have to keep your GL back end clean. |
| Installation is easy until you find the four screws used to secure the pegs are missing. Don't try to call the toll free in the instructions because it takes you to a different company (866 277 9598). If you go to Kuryakyn's web site and try emailing them they will not reply to your email. If you call them (real toll free in Kuryakyn web site) they will tell you they only have one employee (yes, only 1) reviewing support emails. But they will tell you they'll get back to you: nothing after 4+ days. Yesterday I contacted Wingstuff and they were nice. They promised they will call me with a solution but I am still waiting. Long story short, I have not been able to complete the installation of this highway pegs I bought for my birthday. For the record. These are the missing parts: * Two (2) - 5/16-18 X .75 Socket Head Cap Screws: 5/16-18 X 1.0 SHCS * Two (2) - 5/16-18 X 1 Socket Head Cap Screws: 5/16-18 X .75 SHCS Stay away from anything smelling Kuryakyn: QA is really bad, their customer support is even worst. |
| I had heard a lot of good things about this backrest, and I was not thrilled with the backrest that was already installed on my new to me GoldWing (2018). I purchased and installed the Utopia, and it was a very straightforward install. I have ridden about 500 miles with it so far, and I am pleased. I think at this point I have to get used to backrests. Once I do, I expect to be very pleased with it. |
| Installed this today on my 2012 and it is a lot easier than changing the air filter. Comes with a protective film on the two parts and once you get that off your halfway there. It went where it is designed to go witjout much fussing around. Cons - I don't care for the way it just sits on the lip of the front lower cowling and it leaves a big gap on both sides on the front end of it. Debris probably won't get in there but they are there. I didn't find the edges dangerously sharp, a lot less dangerois than when I worked in sheet metal. I believe it will do what it is designed to do. Too bad we can't post images of what we write. |
| some items can make a bike just look out of place, but these rotor covers look like they belong and adds a finishing touch. easy install. |
| It's OEM so you know it meets specifications. With aftermarket stuff you can't always be sure, even if the jug says "good for all cooling systems". Thanks, Wing Stuff |
| Purchase this cover since my old one was falling apart. It lasted for over 10 years! That is why I purchase a new one. Great product as long as you take care of it. |
| Absolutely love this winsheild . I bought the short winsheild, my old one had blemishes from previous owner . This was just what I needed .Im 6 foot tall and the wind in the low position hits the very top of my head and theres about 4 inches to look over. Great windsheild |
| Vent fits perfect, works better than stock .Fit was perfect . |
| Pulled my back out when using the OEM center stand, now I can get it on the stand with no problem. |
| Returned my first one because the inside sun screen when pushed up retracted all the way up into the shell of the helmet, had to use a pair on needle nose pliers to get it out. sent it back for a new one and the second one does the same thing. Very poor for HJC. |
