Contact Us
| This is a good cover to keep the sun off of your dash and seat. Water resistant is a little bit of a stretch, but it works well. I also like the logo. A little red white and blue never hurts. |
| I have to agree with Dusty... the front velcro straps don't seem quite strong enough, so I used a bungee cord across the middle just to be sure. I took this on a 2500 mi trip, mostly freeway, and the rain cover vibrated so much in the wind that it scratched the trunk lid behind the passenger's backrest. If you remember to tuck it in behind the raised front bar of the luggage rack, however, you can avoid this. I would have left the two front mini-compartments off and beefed up the front straps. Still, it's a great bag for the price. If you're solo, put it on the back seat. |
| Great look and easy to install. Took 5 minutes per side! |
| Very easy install and really does look nice. |
|
A word of warning - The supplied bolts WILL NOT fit the Ergo II unlighted Cruise Boards. I had to use the original bolts and install a 1/2" ID spacer from my local ACE Hardware to make them work. Aside from that and a lot of anticipation waiting for them to arrive, they work and look great! What a relief to be able to throw my legs out and not have them banging against the fairing or getting very warm against the valve covers! |
| This 6' cable is great. Able to reach handlebar grip area with no problem. This cable does not come with the little rubber boot for the box pass through. I carefully took the one off the OEM cable and used a cable slide lube and streached the grommet with a snap ring expander and worked the cable plug through the grommet. Make sure you have the grommet going in the right direction. Wish this cable came with the grommet installed, it's a little bit of work to get it worked on. |
| for the flag ship mother Honda cold have ben a little nicer on price the ends for the antenna don't work with the swr meter trip to radio shack spent more $$$ on adapter wingstuff does have the best price in my opion for the radio |
| Good fit and install easy. Good piece for the money. |
| Good piece for the price. 3M tape was not what it could be. Needed some massaging to get good fit but that was expected. |
| Good quality for the money. Needed some massaging to get a good fit for the curvatures but that was to be expected. Good buy for the money. |
| Material was noticeably thinner than left side piece. 3M backing looked like it was made out of scraps and did not cover the back as it should. Disappointing for the price. |
| To paraphrase an old song, 'What a differance a board makes'. Much more comfortable that the pegs and an easy install. Just make sure you get the kickstand extender. When you remove the rubber from the original shift lever, SAVE it and put it over the kickstand extender - it prevents the extender from hitting the boards. |