Excellent quality, looks great and very functional. Instructions were poor. Tiny pictures instead of a diagram, Watch a YouTube video, much clearer and shows the removal of the fog lamp cover and engine cover. |
Got the filter very quickly, thanks again Wingstuff! |
These are beautiful but , they don't fit very good , they seem to not have enough bend to form to the contour, I even put a lot of double sided gorilla tape.I m going to have to put screws in them. |
I'm unable to remove the back top cover. I tugged and pushed and thought I was going to wreck it. I called the Big Bike Part manufacturer & they confirmed I was doing it correctly & suggested that even if I broke the tabs in the removal process that were are lots of points of attachment. At that point I was prepared to lift and twist it off but I couldn't pull the front of it over the passenger hand rails. I gave up & reassembled it & put it back in the shipping box. |
Fits well, easy instal, should do the job. I would not pay extra for the painted version though. The paint started peeling just from handling during the install. |
easy to installed, after 400 mile working great. Don't even notice there. |
I could not get this wrench to fit in the small space on my 21 GW tour. |
Good OEM quality. Paired on first attempt and has been working as intended since then. Why Honda did not provide a 2nd with the original 6th gen bikes is a mystery. |
Must have for a plug and play install with later GL1800s AND the F6B. Plug wires were not crimped enough and I had to repair. |
Plug and play for the most part and it DOES FIT the F6B. I have a 2013 Deluxe with heated grips and it fits in nicely. I wish the gauge color (red) matched the dash lights (ice blue) but other than that, really nice unit. They provide a Honda OEM plate with the Honda OEM gauge. You will need the extension cable to reach the left hand side. |
The speakers are not made for the front of any gl1500. Way too small for the front. Can get 2 screws in out of 4. That’s with some forcing. If you risk it like I did. You can get 3 in with a screw gun. But they are not for the front. Only rear. As for sound. No notable differences. Most likely due to them being smaller then stock |
Bought to replace break lights. Not a single bulb on the gl1500 is compatible with the 1156. Have to go with the 1157 |