Find stuff for your GoldWing by model and year

Your Bike:
(also showing 'universal fit' items)
Honda Goldwing Motorcycle

WingStuff Community

The world's most active GoldWing community. Seriously.

LED Clear Lense Trunk Spoiler Run/Brake/Flashing
ITEM CODE: PG20043

01.15.2010
I don't know the difference between this product and the A0451842 which is cheaper. I bought and installed the cheaper one and love it.
Was this helpful?

Rubber Baby Buggy Bumpers for GL1800
ITEM CODE: PRRBBB,   SKU: PRRBBB

01.15.2010
Just purchased these and put them on. Took about ten minutes. I found the spit method works best. It takes a little bit of effort but with long nose pliers they will eventually pull into place. The stem is very strong and didn’t break off even when I used a lot of force pulling them through. The pack comes with five stoppers even though you only use four so for those watching the pennies get your buddies together, order four packs and you can make up one pack free.
Was this helpful?

ITEM: WS18001

01.15.2010
Great for storage in trunk, however with items in lid compartments the top will not close if trunk is full. Good product however!
Was this helpful?

Ergo II Highway Pegs for GL1800 Gold Wing
ITEM CODE: KU4056,   SKU: KU4056

01.14.2010
These r so COMFORTABLE !! I put these on 2 match the drivers pegs I got from here and they r just as nice i am 6ft 2in tall i did not have 2 get the shorter arms because i have a trike and i just lowered the arms 1 notch but if u have a bike u cant do that or they will drag when u lean its nice 2 b able 2 lower it because ur legs r relaxed and they dont hit the farring so much as far as the insall u will need a 19mm socket and a #8 allen wrench not n the kit as 4 the washers the star washer goes on the 19mm against the bolt then 1 of the regular washers then 1 regular washer behind the #8 allen head bolt and ur done hope this helps c ya
Was this helpful?

Frame Covers w/Rubber Inserts for GL1800
ITEM CODE: BB52724,   SKU: BB52724

01.14.2010
These r super GR8 looking on my trike and can b install n a few min with or with out the 2 sided tape cause the faring will hold them n place i use the tape cause it was there lol get the drivers chrome foot peg holders if u get these u wont be sorry it completes the boomerang look
Was this helpful?

Chrome Dually Driver Replacement Footpegs
ITEM CODE: KU7938,   SKU: KU7938

01.14.2010
I put these on cause I hate the look and feel of the OEM pegs if u put them bside each other wow !! what a diff these r much better looking and stronger than them and with the matching HWY pegs it looks GR8 as 4 coming lose has not happened 2 me so far will let u no if they do
Was this helpful?

Chrome Footpeg Mounts for GL1800
ITEM CODE: KU4544,   SKU: KU4544

01.14.2010
These look gr8 easy 2 insall and if u get the frame covers u have 2 get these I saw a 45,000 $ goldwing 30th trike with everything u could think of on it and the first thing i saw was it did not have these on it stuck out so bad out of all that chrome thats what i saw 1st anyway GET SOME
Was this helpful?

Iso-Grip Set w/Chrome Accent Ring
ITEM CODE: KU6180,   SKU: KU6180

01.14.2010
These r a very nice add 2 my trike they look sweet and r very comfortable as well I did have 2 adjust my clutch though i could not start the bike unless it was n neutral just changed the setting to 3 and it works gr8 As far as the install i put the clue inside the grip 2 stop it from dripn on the bike but i also covered it just n case worked like a charm not 1 drop anywhere
Was this helpful?

ITEM: KU7314

01.14.2010
Zero stars if I could. They look great, but after time the chrome has peeled and I mean peeled really bad. Kury has had a big problem with this.
Was this helpful?

Rubber Baby Buggy Bumpers for GL1800
ITEM CODE: PRRBBB,   SKU: PRRBBB

01.14.2010
Don
Just put these on the trunk this past weekend. Cut out the template, overlaid on the trunk as instructed, drilled smaller hole first (1/16") then drilled larger hole to make sure they were in a single wall thickness - and sure enough the template was right on! Spit does works best with a strong steady pull with needle nose pliers from below and firm pressure from above. Trunk lid is a bit hard to close, but should adjust over time. No more rubbing. This should be a standard feature from Honda.
Was this helpful?

Kuryakyn Chrome Floorboards w/Heel Shifter
ITEM CODE: KU4038,   SKU: KU4038

01.14.2010
Okay, I have had these on for a few months now. Good to go, look good. I had the sticking problem as mentioned. Just added small amount of wheel bearing grease and the sticking goes away. Best to use the stock ridgeid plastice piece made to cover shifter. I had a transmission problem (prior to the floorboards) took it in for extended warranty. The bike has 62,000 miles. The first thing they asked, does it have floorboards? Honda will void the transmission warranty. They MASTER Honda tech says 11 of 12 trannies he has done had floorboards. I did not ask if they were all Kuryakyn. I had the floorboards, just thankfully did not install them yet. If you have warranty issues, take them off before visit to dealer! He said okay to ride with them, just make solid shifts, and do not rest heel on shifter. Also do not shift lazy. The gear cogs will partially engage, wearing the tips of the cogs. The tranny will start partially engagging, then pop into gear when you throttle up. Real expensive if not warranty. Use em, enjoy em, but beware!
Was this helpful?

Utopia Driver Backrest for GL1800 2001-2017
ITEM CODE: UT18MC12,   SKU: UT18MC12

01.14.2010
well after the thought of cutting the seat, it was easy sailing, it looks great and the adjustments on the seat was great. wish i had gotten it sooner a perfect match for the stock seat, and the extra storage is a big plus. even the harley riders wish they had one a great desighn, i love that it has no bars. folds down easy
Was this helpful?

29758 Reviews Found

| 1849 |