Contact Us
| These are very nice. Easy to install, and make those longer trips much more comfortable. I don't use the flip-out heel as much as I thought I would, so if I were to do it over again I'd probably save a few bucks an just go with the Ergo highway pegs |
| Nice product. Slid right on and was set tight with a single blow with a rubber mallet. The set screw assures that it will not loosen up and fall off. The only thing I didn't like is that it sticks up higher when the stand is in the up position and my heel hits it. It probably wouldn't be an issue if I had floor boards instead of the OEM front pegs. |
|
Not overly pleased with these. They look nice and are comfortable. Cons: Had to add a washer to the rear mount to keep the board from rubbing against the side panel. The hole for the cotter pin left an 1/8th in gap so the pin wanted to slide, so I had to add a spacer. For the price, I thought it was a bit cheesy that Kuryahyn didn't include the spring, ball, and detent plate so you didn't have to disassemble the OEM peg and selvage those items. Should be a bolt-on no hassle product IMO. |
| This is a no-brainer. Major impact with little to no effort. About as easy to install as it gets. Huge return on investment. |
|
WOW! These are major bling. Easy to install with major and instant impact. These will completely change the look of the bike. Gorgeous. They interfere with my rear-folding passenger highway pegs a liitle bit. I have press these in and pull the pegs out and they literally scrape by to stow them but it can be done. Not a huge issue and the looks negate the little clearance problem. |
|
Great addition to any bike. From the saddle you barely notice them but you can't miss them from the sides. When riding in a group I first noticed how effective they were at signalling intent and knew that I literally needed them. So simple and easy for so much function and cool factor. I installed these with the companion Stealth lights and the front reflector LED conversion. Install is super easy and all three took about three relaxed hours to add. The three components were made for each other and add so much to the looks, safety, and function of the Wing. Install was plug and play on my '05. |
|
These look amazing and add so much to the looks of the bike. You can't really see them until lit up. They also add much needed side visibility with their running and turn signal function. I can't say enough how good these look. AWESOME! I installed them at the same time I did the companion LED mirror turn signal upgrade and front wheel LED reflector upgrade. Install took about three relaxed hours and was very simple. I used the adapters in tandem on my '05 so no splicing or soldering was required. I also have an additional plug available for another running/turn light when I want. |
|
Awesome upgrade. Very easy to install. I did these at the same time I did the Opera lights and the turn signal LED add-ons in the mirrors. I piggy-backed the adapters on my '05 so there was no splicing or soldering required. Simple installation with no problems at all. To istall all three upgrades it took me about three hours at a relaxed pace. I also have an additional running/turn signal plug waiting for more lights since I used two wiring adapters in tandem. These give terrific added side visibility and look fantastic with the opera lights. The color is almost identical between the LEDs. A must have in my opinion. |
|
First the good: These look killer! With the chrome battery box covers and other bling these really add an awesome visual and functional accent. I was surprised at their heft and the fact that they are actually steel. Now the bad: They don't stay on. At all. Adhesive is horrible and does not work. First piece fell off yesterday morning after a coffee run. Temperature was not that high as some have stated theirs fell off in the heat. Found it laying on the crash guard So I stuck it back in place there and kept my eye on it. It made the trip home where I pulled the others off with no effort at all. I can't trust that I won't lose the remander of them on the road so now I have to figure out what to do. I want them but don't want to drill or permanently adhere them to my paint. Now what?... Three of the pieces fit the bag contour quite well. The forth, not so much. I now have some scrapes and nicks where I didn't before. I wasn't too worried since they covered this up. Then they fell off... Tempting and a great accent but until they figure out how to effectively attach them I would not purchase them. I'm pretty bummed about the whole thing and not sure where to go with them from here. |
| Easy way to clean up the ugly stock plastic strip hiding the ugly frame weld. Looks great and easy to install. Definitely get the passenger floorboard guard at the same time. |
| Simple install. They work. Good item! |
| we bought ours at Wing ding,we love them. It's made the ride even more smoother |