Contact Us
| These risers did the trick. They bring the bars up and back and still keep the factory width. Had the kuryakyn risers but didnt like the inward position. It caused wrist discomfort and there is no way around it. Great product. |
| This cover is a really nice cover. Fits the bike nice and snug and no problems with wind blowing it off. Great to have during long trips to protect the bike and it does not take up that much room to store. Highly recommend |
|
Nice addition to the rotor covers. I got the amber/amber so I could use them while riding at night without concern of a conversation with the police. A few notes: - the lights are all on or all off, there is no way to turn on just the inside lights seperately if you wanted. If this was the case I would have prefered the amber out, red/blue in lights. - The wiring provided to hook up the lights does not have a connector placed low enough to remove the rotor covers for maintenance in the future. A major flaw in my book and I solved it by adding my own connector, but in my opinion, something I should not have to do. Overall I like these and think they are a good product, just be prepared to do some added work if you want to set it up for easy maintenance in the future. |
| The rotor covers look great once installed, however the directions could use some fine tuning. I installed these on an 07 Goldwing with ABS and while the install went okay it did have its issues. One key item for me (and this may only apply to ABS models but I'm not sure) the directions never said to remove the bolt that the top rear hole on the covers use to attach to the bike. It was easy to figure out, but for the price companies charge for items they tout as easy to install should include directions that apply to the bikes. Adding a line or two that says " for ABS bikes do this step-..." wouldn't be all that complicated in my book. Another reviewer says there is a seperate model for ABS bikes, but I could not find them on the kuryakyn site. |
| I purchased the Trunk handle last summer and had the dealer install it. I didn't wish to screw things up attempting a installation. Despite the fact that the handle is chrome plastic it looks and functions great. My trunk has no luggage rack thus it's easier to lift. |
|
I finally had cause to use this tool. Some observations: 1. You might want to bring a small board like a 1 x 4 x 12 or so along to place under the center stand if your going to work on a soft shoulder of the road. 2. Also there is one piece of equipment that doesn't come with the kit. A needlenose pliers. Highly recommend carrying a pair for pulling out small nails. I got a miniature set to carry in the stop n go pouch. Works Perfect! 3. Finally, I highly recommend that you practice before you need this, it will save you time and aggravation. I'm very pleased with this tool and would recommend it without hesitation. |
| Great product worked well and easy to install, Now my bike is complete at the rear. |
| The finish of the piece is very good for chromed plastic, installation was a snap, but if you think this is going to be used as a 'handle' forget it. Very flimsy mounting if you ask me. Honda engineers surely can come up with a better piece that attaches more securely and can be used as an appropriate handle. It dresses out the rear of the trunk nicely, but I'll still use my spoiler for raising the trunk lid. |
| great product nice weight to them easy install after watching video.the directions that came with them not that good.me and wife put them on in about 30 minutes after watcgung video. |
| I installed this on my 2010 while on it's side stand, a few extra minutes added to install doing it that way. Real tight fit, Ohh and use gloves had some "Really Sharp" edges sliced me threw my glove. What's a little blood for my wing. Be Safe & Remember "Never Ride Faster than your Angel and Fly" |
| Nice compact unit, but it blew the fuse in my fairing power socket after less than 1 minute of use (I kinda figured that would happen, but I was in a parking lot and was 2 pressed for time). So use the permanent connection or alligator clips, or you will be takining the fairing pocket out to replace the inline fuse of your power socket. |
|
Just an update on this ShowChrome windshield since I have put about 2000 miles on it since installed 1 month ago: This windshield scratches easily, and yes, I always cleaned with a clean micro-fiber cloth and proper solution.... still lots of hair-line scratches with even the best attempt to clean properly. The black painted trim at the bottom of the windshield (only 1/2" visible at the lowest setting and 4" at highest setting) is being scratched away in the middle and the outsides from being raised and lowered with just over 1 month of use. So now I have to decide how long I can put up with the black being scratched away before I pull the whole thing off and remove all of the black paint and just make it all clear and polish the hair-lines out. The performance/buffeting reduction is great, but the easy scratching, along with the black area being scratched away, is definitely a drawback. Maybe this windshield could have benefitted from a strip of felt or fabric being attached to the bike where the windshield slides against it????????? Considering the price and the reduced buffeting, I still like this product but have to drop to 3 stars for the lack of R&D by ShowChrome. |