Contact Us
|
These look and feel great, but the set-screw in them is deisgned to keep the Clevis to be perpendicular to the plane of the board... which is fine if you mount them as highwayboards, but as you can see from the photo, the clevis is at a 30-40 degree angle. Only 4 Stars because of the poor engineering of the set screw. When mounted as pegs, these boards tend to loosen unless you REALLY overtighten the bolt holding the board to the clevis. I'm happy with them, though, and have gone through a couple of sets, since I tend to scrape my pegs a lot and wear them out. |
|
I added a Kuryakyn heel-toe shifter to my GL1800 after I broke my ankle, using the stock pegs on top of it, but wanted to go to floorboards later. I discovered, to my dismay, that floorboards could not go on top of the Heel-toe shifter, unless you bought the model that included floorboards. So, I purchased these ErgoII Iso-Wing pegs and mounted them in place of my stock pegs and it worked great. However, there is a set screw with an indent that is designed to keep the pegs perpendicular to the arm when using them as highwayboards, but I need to have the pegs at an angle when using them in place of my stock pegs. Only 4 stars for the stupid design of the set screw. My solution is to overtighten the main bolt connecting these pegs to the swivel adapter, and then tighten the small set screw just so it doesn't get lost. |
|
Bought the trunk power plug and installed it. Product is ok and quality is good. Only drama when installing was my hole-saw wobbled and the hold cut too big - but I fixed it by cutting the grips on the side of the socket and expanded them once I pushed the connector into the hole and then applied silicone. (at least it's in the trunk lid and not for all to see). Take my advice, drill out a piece of old plastic or very thin timber and test the connector fit before you drill your expensive plastic. Good luck and a wise investment. PS - remember, the outlet is always HOT - even with the ignition off...so mind you don't kill your battery.. |
|
This looks awesome on my Black Goldwing. Watched the video, read all the feedback and followed the instructions. Measure twice, cut once and get a second set of eyes to make sure it's all square / straight. Installation was an absolute breeze. Also took the opportunity to install a 12v plug in the trunk lid and tidy up some wiring from my handle/brake light. |
| Great Cup,I have a 08 Pearl White GL. So the HI-Gloss Black reflects very well. I have the perfect cup for it, have not the opportunity to use it yet though. Water bottles ride great, barely a shimmer (pending road conditions). |
| Looks great on my Wing. Comfortable riding and easy shift and footbrake access. Should have bought them right away. |
|
There is NOTHING better than RAM mounts when it comes to versatility. I installed a single ball on LHS (clutch) and a double ball on RHS (brake) and purchased a variety of arms and attachments. Versatility is most evident if you have multiple vehicles + devices and you can transfer from bike to car and vice versa. Do yourself a favour and purchase a lock for anything you connect to your bike...stops the opportunistic thief.... |
|
Same as the other reviewers....a must for your spares kit... Very useful for fitting headlight / spotlight protection. |
|
Bought the Kuryakyn mirror indicators and the wiring kit (KU607312P). Went to install and realised I needed these adapters (KU7300) as well so I purchased them. The only problem is - they don't fit an Aussie Goldwing. When you rig the harness and connectors up they look the part but the connectors on the end of these would not fit my Australian Goldwing. I ended up splicing in the other harness (KU607312P) so that I could use the standard Kuryakyn plugs to connect other accessories. All done now, indicators work perfectly and at the end of the day I'm happy.... Don't waste your money on these KU7300 adapters if you've got an Aussie Wing ! Message me if you have any queries.. |
|
Bought the Kuryakyn mirror indicators and the wiring kit (KU607312P). Went to install and realised I needed these adapters (KU7300) as well so I purchased them. The only problem is - they don't fit an Aussie Goldwing. When you rig the harness and connectors up they look the part but the connectors on the end of these would not fit my Australian Goldwing. I ended up splicing in the other harness (KU607312P) so that I could use the standard Kuryakyn plugs to connect other accessories. All done now, indicators work perfectly and at the end of the day I'm happy....Don't waste your money on these adapters if you've got an Aussie Wing ! Message me if you have any queries.. |
| Works great, I installed them on my 2012 stock bolts arent long enough so I pick them up at Home Depot. Instructions say to pry off the molding with a flat screwdriver, but if you care for your paint use a teflon spatula. |
| I got my first set of Centramatic Goldwing wheel balancers in spring of 2010, I could not believe the difference in the ride. After trying it out on all types of road conditions, I got another set for my wifes bike. She doesn't understand to technical stuff but states "It does ride nice". This is truly something you should try and buy. |