Contact Us
| Inexpensive addition that really dresses up the front of your 2012 Goldwing. They are easy to install. The first one went on so easy I got careless with the second one, after lining it up I was holding it in place for one minute to let it set and I didn't notice that the lower point had moved out of place while it was covered by my hand. When I took my hands away the lower point was a good 1/4 inch out of place. I immediately pried the piece off, it wasn't easy but it came off and the adhesive actually stayed in place and I was able to reset it and they look great. |
| I found these to be much better than the original 6in arm version. Long legs now can breath a bit, out away from having to hug the bike. If your 5ft.10 or taller, great product! |
|
If you change your own oil on your Goldwing, then you need to get a couple of these, at least. Thiking of getting a couple more packs, I would be set for the life of the bike and then some. Aloha! |
| We should all have some of these in the garage. |
| We should all have some of these in the garage. |
| Very simple to align and install. Looks great and breaks up that large area of colour very nicely. |
| Another item that should come standard. Great cover for your remote. Everyone should have one. |
| The basic installation was very easy. I didn't realise until I received them that they are marked not suitable for EU/AU models. Sure enough the bike wouldn't start once it was installed. (It interferes with the HISS system) After a bit of looking around on the web I found a solution. With a dremel tool (or a file) just remove about half the chrome on the inside of the round part that touches the lock barrel. You can't see this area once installed and it works fine. |
| I bought a few and gave them to friends. Cheap as and do the job. |
|
It is what it is. Its just a toy but it looks great. I thought the price was pretty good also. I reckon they would sell more if they had more colours. |
|
Just felt like I needed to revise my earlier review. Had a question about the cover which the guys at WingStuff couldn't answer. No problem, I'll email the company. Three emails later, with no response, my feelings are now: screw these Sknz clowns. I will be buying a new cover for my bike, but not from Sknz. I'll be buying the Geza Gear cover https://wingstuff.com/products/34005-sun-buster-half-bike-cover?context=geza_gear instead. For me, you can have a good product, but without good customer service you won't get my dollars. I'd have given Sknz 0 stars, but it's not an option. |
|
Easy install, other than both acorn nuts on the kickstand side were corroded, so be careful when removing. Note that mike bike is only one year old. One twisted off the stud, the other barely came off. Coated remaining three acorn nuts with anti-seize prior to re-installing. As another reviewer noted, used some split rubber hose on the very front of the pan on the removable front half to reduce rattle. Also made for a snugger fit. Will report back if any noticeable difference while riding, such as heat or wind gust. |