Contact Us
|
I ride with PGR and do many, many escorts for Active Duty and Veterans each year. With in the first year I had the Revco hitch flag holder, the aluminum rods fatigued and broke at the mounting screws. Flag pole fell over at a very low speed. Revco would not replace them, WingStuff did. Short time later the aluminum plate that the rods slide into on the hitch had fatigued cracks. Again Revco would not replace but WingStuff did. I had stainless steal rods made over a year ago and they are strong. Today I went to mount the flag holder and noticed the aluminum hitch plate is cracked again. WingStuff would NOT replace it. Will have the hitch plate made from stainless steel. The idea is great. The aluminum materials are extremely poor. For poles I use 1" conduit and eye screws. $3 vs $35. I also drilled the pole holder, pole and use a locking pin to ensure poles stay put. I believe the Revco Trailer Hitch Flag Holder and kit is way over priced for the quality of what one gets. |
|
I purchased them 2 years ago and installed them along with Elite III's. I am replacing both tires with almost 18,000 miles on them. The rear is becoming dry and the front still has probably 3,000 left, but I like to change tires at the same time. I have taken it multiple times from the first time of installation and a few time during at speeds up to 115 MPH and it drove like riding on glass. Bought them again with my new set. Will never traditional balance again. The benefits of always having your tires balanced it great. I saw one or 2 people say they did nothing. You need to make sure you put in the proper amount and use the valve stem with the built in non clog valve is you wish. Yes, Once in a while had the beads get caught in the stem, but all I had to do it pop a little air in the valve to dis-lodge and all was OK. |
| I have a GL1800 2010. Even though the title indicates that it is for the 2010 it is not. Notice the front of the cover it says 2008. I purchased one of these and had to return it since it didn't have information related to my year bike. Wingstuff was great to work with and gladly accepted it back even though it had been opened. I then had to purchase the printed manual to get service information related to the 2010. It too is a great manual, but the CD would have been easier to store and search. |
| To keep your Eagle looking new get a can of clear coat and spray a couple of light coats on it. I have one that is over 3 years old and still looks great. I do this with all my gold and chrome acc . |
| This works great...went from having to have the radio up to 24 to hear in traffic at highway speed, down to 8...and can hear everything clearly...these are a must...so easy to use with any earbud headphones. I will be ordering for the backseat as well and maybe a couple more incase I lose one. |
|
Works for about 90 minutes. Humidity plays a role in cooling / duration. More humidity lessens cooling effect. Less humidity aids cooling, shortens duration. A fine fix for a hot commute. Not a touring item though. Very much worth the money. |
| I did 7000 miles in 3 weeks on a Honda 750 Shadow ...the seat that bike after 45 minutes was like sitting on cement ...it hurt...I new that there was no way I could go on a trip without help ....I looked at gel packs ...beads..and some others on many forums... the one that got the most praise was the AirHawk so I bought one and it literally saved my Butt... I could ride all day pain free and a it does keep you cooler in Hot weather... I since have sold the shadow and now will use it on my Goldwing for trips ..it does raise the seat height slightly an issue for my 29"inseam on the 1800... but manageable |
| My husband loves this ball cover. He put it on my CAN-AM when we took it out one day and was going to look for another one for the trike. Came out from the store we were in and someone had stolen it right off the ball. I guess he isn't the only one that likes it! Now I get to order two instead of one! |
| A very nice upgrade from my OEM speakers. Easy to install, and they sound much better. . . |
|
Buyer be ware. If you purchase the standard windshield expecting the OEM vent to fit too bad for you. I just received my windshield without a vent hole planning to cutout and reuse my OEM vent that I just replaced last season rather than spending the extra money on a shield with a vent. Too bad for me, after cutting out the hole in the new shield I found the vent would not fit due to the curvature of the shield. This is after I purchased previous to this shield a Slipstreamer swept back for the same application and found that after installing it the handle bars hit the shield when I went to move it in my garage and back to Wing Stuff it went. NOW THIS :( I should have just went to the Honda dealer and bought the shield from them. It would have saved a lot of time and agravation. |
| The 4 bags they give, 1 big one, 1 extra med, and 2 basic small pouch bags...These are a waste of money, do not buy, spend the extra money and get the 3 full size bags for all 3 compartments..the bags look like something my kid would have...horrible. |
| I was a bit hesitant to order based on some of the reviews. I previously purchased Kuryakyn Kickstand #7104 and the floorboards and thought I would give this a try. It took just a couple of minutes to install and I am more than pleased. I had no problem with the bolts being too long or coming loose. The OEM kickstand on my bike was a bit samller diameter and I see where the extender would not tighten down as it should. |