Contact Us
|
These knobs protrude 5 mm less than the OEM part. The top of the knob is also tapered making it impossible to grasp wearing gloves. They say they are for a 2012 GL 1800 but these are better suited to earlier models. For 7 bucks i just tossed them. |
| easy to install but lid entirely to hard to close i've put 10000 miles on bike since i put them on if i could get them off without leaving several holes i would throw them away. dont make the same mistake i did you will regret it. i have alot of goodies on my bike this is only one of three things i wished i hadn't bought TRUST ME |
|
"CB use? Will this enable you to use CB with their headset and SM10 bluetooth??Can't get a straight answer from Sena or??" I got the straight answer from them....It's unidirectional. You can hear all including sterio, CB and Navi but no ability to transmit yet. |
|
A must to have because you don't have the trunk lights to rely upon on this model. Installaion was easy, the re-taping of the harness takes a few minutes. Beware of the position of drilling the holes; the left side of the light assembly lies right next to the key lock for the saddlebags on the F6B! Make your hole down low. |
|
These were purchased ahead of my delivery date. I don't think they are going to fit; the mirrors are a different shape from the standard wing, and there seems to be no room for the light strip. Bummer. 5 stars because of the product quality and the excellent service. |
| In 1 season of moderate use holding even very big large sized McDonalds soda the quality is holding up. The best cupholder on the market for the price without question. I liked it so much I bought another one for around 20 bucks to install one on each side of my handlebars for a passenger as well. Only thing I worry about is the plastic breaking after a few years of use since plastic and sun don't mix over time and can crack and become brittle. I don't know why others are complaining about not fitting water bottles, etc. rattling around since both of mine came with foam cup cozzy liners (soft foam) to fit a lot of bottles snug and secure with no rattles. Only time will tell if it last 5 years or more but as of now, works great. Plus, I will keep my receipt since Barefoot willies guarantees this for a lifetime so if it ever breaks all I have to do is call the company and have them send me another one for free. I think the 2 weak points over time may be the bolts going thru the plastic on the handlebars and the metal bolt holding the cup on that is adjustable may break the plastic if tightened on too hard but I have cranked pretty darn hard to secure both on handlebars and the cup slider bolt itself and so far, it is solid doesn't move and has not broke. For plastic, it is decent quality plastic and definitely not junk plastic that will break right off the bat. I bought a liquid caddy brand and modified the swinging back and forth and that broke off my handlebars almost instantly cranking it down tight and that was about 15 bucks so 20 for this is a lot better quality. |
|
I have these on my '06 Wing and I ride year round in Colorado and well beyond. I had to replace my lower lamps in the first year because of all the pitting from road junk and I installed these protectors. Yes they get all the road junk / pits, scratches. They are much, much easier to clean, buff, polish the the pits / scratch out than the lower lamps. One may wish to remove the lower cowl and dust off the lamp about every 6 months. These are far better than the velcro disks that are offered by WS. These allow full use of the lamp's reflector and the rubber mount allows flexing that they doesn't easily break. I hit a jack (rabbit) at night at about 70 mph in the desert. The protector flexed no damage on lower cowl or lamp, just hair left. Dent left on metal exhaust chrome cover. I liked these well enough that I have a backup set. Best protection I've seen for lower lamps. I also recommend similar protectors for head lamps. |
|
I installed the hitch yesterday, and it only took an hour and half. The install was straight forward. I did leave the long bolt installed in the heim joint and slid the trunion bars into place. Then tighten the heim joint before I tighten the rest of the bolts to the rear crash bar. Doing it this way you don't have the issue of trying to put the washer and nut on the long bolt. There isn't room to reach the bolt with the saddlebag being in the way. The hitch is solid. My trailer loaded weighs less then 275 pounds. I see no issues at all with this hitch. Great product. |
| These are a great buy. Very simple install. Excellent comfort for a passenger and they look fantastic. Quality is excellent. I would recommend these to anyone with a Goldwing. |
| This was easy to install and a must have on a wing. Why this is not standard equipment on the wing is beyond me. |
| Cable fits great, easy to install and very helpful. I am hard of hearing so I turn the volume up on everything. This of course is TOO loud for my wife so we needed to cable to keep our ride and marriage peaceful. I did some research and found this to be the best deal. |
|
I now have 13 led lights out. They are coming off this week. Mounting screws legs are paper thin and break if you look at them. Please save your money. I have not found anyone that can fix them. They look great but are JUNK for the high price. |