Contact Us
| This plug has a good weather seal on the 5 pin Din side. There is No Mic wires in this plug it is for two channel audio - Left and Right speakers! It works great for what it was intended |
| Installed this with a buddy of mine. I already had the wire connection from my turn signals as a result of some of my previous upgrades. The biggest concern was to get the placement right. It kind of sits in a groove, sort of, but we wound up placing it where the top of the trim meets the top of the fairing. Looks good and the amber lights are close enough to my clear lens with amber bulb turn signals. So far, so good. |
| I just bought a 2nd set of these boards, for a new 2012 wing. My rider is 5'0" and loves the transformer function. She never gets on unless the extensions are up. |
| A nice safety addition that looks great. A bit of a challenge to install due to a lack of information on the adapter cables required. Along with the LED signals a 7300 adapter kit is required along with two 607312P adapter cables. The right side mirror connector was inside the fairing making access difficult but the left side was easily exposed once the mirror rubber was pushed out of the way. |
| This is perfect for keeping dust and my cats from getting on the bike. I keep the bike covered, even in the garage, so it stays clean and ready for any ride. Light weight, and perfect fit. Packs easily into the carrying bag, and fits in the saddle bag nicely. |
| After watching the video on Wingstuff about the Baker Built Hand Wings, I decided to give them a try. I figured anything that could help cut down on the wind on those cold days would be worth a try. Took just minutes to install, and I love them. My wife says she has also noticed a big difference. I like how I can eleminate the wind blocking effect on the warmer days if I want. I will be purchasing the other two products for the mid and lower portions of the bike. This is well worth the money. |
| This bead seat cover definitely reduces hot spots and improves circulation and comfort for riders like me. It is a good product because it does what it's supposed to do. However, I had to get two pairs of pliers and bend all four hooks open so they would actually FIT under my seat lip, then I had to move the front seat hooks up and in and under the bead seat cover so the hooks would properly reach the front/side lip of my motorcycle seat. I was surprised that a product clearly MADE for a motorcycle seat and sold at WING Stuff would still need to be hand fitted. Oh, well. At least my butt is cooler. |
| My wife found that with the stock boards her legs would hurt after several hours of riding. Legs were not quite long enough to rest all of her weight on the boards. We toyed with the idea of adjustable foot rests but opted for this concept since it allows her to have several options of where to place her feet, just like the driver gets with highway pegs. Great product, high quality and built well. |
| Not bad for the price. It does seem to be in the way at times regardless of which side it is mounted on. Foam inserts to hold larger or smaller cans or bottles seem to be in the way as well. Got to keep them somewhere when the holder is in use. Next time, I will spend more and get a better setup. |
| I got the wide kit a couple months ago. I’m tall, 6’ 1†and last fall put on a custom seat that sits me back an inch or so. That eased up on the knees but then I was fully extending my arms. I installed them with as much adjustment up and back as possible. For a while during the winter all I had were short trips and they seemed to make my arms and shoulders more comfortable. Recently I took a long trip of 3400 miles with one 700+ mile day and must say they do make everything just right. I no longer feel like I’m reaching for the bars. |
|
I added these LED front reflectors to my 2012 GL1800 and it really lights up the front of the bike. Installation is easy. The only part removal besides the stock reflector is the brake cover. The only extra step I found necessary was to drill the existing hole larger for the wire to fit through without wearing or chaffing the wire in the future years. Connecting the wires behind the mirrors is very easy if you already have the accessory connectors, otherwise you can splice the wires easily as well. You can choose to have these lights operate as either marker lights or marker/turn lights by connecting all three wires for flasher/marker or two wires for marker lights only. overall I recommend these for added visibility. |
| It does the job well. I will have to relocate the fuses to a better location. |