Contact Us
| Just upgraded to this from a stock 1800 windshield. Love it, huge improvement from stock. Much less wind buffeting at high speeds, and waaaay quietier. Really, better than I had expected. I am 6'2", with a long torso, so I sit high. With the windshield fully lowered, its great for most riding. Put it all the way up and its like riding in a car! Quiet, smooth, I can now hear my stereo at high speeds, and I can still see over the top.I used to get neck strain from wind buffeting my helmet... no more! :) Just came back from a 800 mile highway trip and am totally happy! Highly recommended to tall guys! Putting the oem windshield up for sale now... :) |
| I bought these after reading countless reviews about height and leg length and any vibration from the engine. These are the best looking and easiest to install/adjust that I have seen. |
| I boutght this item hoping it would cover the holes left by removing the CB antenna, without the armrests. It does a perfect job and looks OEM (a little chrome doesn't hurt). |
| I've have two of these headsets and are satisfied with there overall performance EXCEPT for the 8-pin upper section cord that attaches to the headset. After a period of time the cords on both our helmets started separating below the reinforcement. I tried to strengthen them with stiff plastic strips and liquid rubber and probably got another years use out of them before one started shorting out. The replacements are about $25 for the cords which is pricey if you have to replace two of them every few years. These need to be redesigned. |
| I do my own work. Too expensive not to. But these lights are too much. I don't understand. I can't find anyone to help me wire. Save yourself the aggravation. Buy something else. P.S. Lights still not working! |
| WELL, I WAITED A MONTH BEFORE I REVIEWED THIS CHROME SHIFTER PEG COVER-CKING IT OUT & ALL-YES I FOLLOWED THE INSTUCTIONS & ALSO ADDED THE BLUE LIQUID LOCTITE TO KEEP THE SET SCREWS FROM BACKING OFF-YES ITS STILL ON & WORKS GREAT CKED IT EVERYDAY WHEN I RODE ALMOST EVERYDAY-THE KEY TO INSTALLING THIS ITEM IS NOT TO SHOVE IT ALL THE WAY ON THE PEG-JUST PUSH IT ENOUGH TO LINE UP WITH THE RUBBER SLEEVE THATS ALREADY ON THERE-THEN SCREW IN THE SET SCREWS INTO THE RUBBER SLEEVE(I USED THE LONG ONES)THIS WILL HELP KEEP THE CHROME COVER FROM COMING OFF OR SLIDING OFF-I NOW HAVE A BETTER FEEL FOR SHIFTING & A BEETER SIGHT TO SEE THE SHIFTER AS WELL- SO YEA GO GET ONE OR TWO--ITS ALL GOOD !!! AGAIN IT BRINGS THE BIKE/TRIKE OUT EVEN MORE, WHEN YOU GOT IT DECK OUT-YEAAAAA !!! |
| WELL I PURCHASED THIS COVER ABOUT 6 YEARS AGO-& I JUST NOTICE, I NEVER POSTED A REVIEW ON THIS COVER- ULTRAGUARD-WELL HERE IT IS-YEA A PRETTY GOOD COVER-THO IT NEEDS AN INSIDE LINER, I BELIEVE TO HELP PROTECT THE TRIKE-THE COVER NOW MAY HAVE A PROTECTIVE LINER- DON'T KNOW -THIS COVER IS STILL PRETTY GOOD- STILL USING IT NOW-THINKING ABOUT TRYING OUT THIS NEW COVER THO-CKING OUT THE LATEST REVIEWS-YEA I-ON THE SIDE QUARTERS OF MY TRIKE- SO YEA CK IT OUT ??? |
| the lights were fairly easy to put in and are truly plug and play but if you really want to light up your switches, this won't do it. It puts the light between the switches and the little wheels for the heated seat and grips. If you don't know which switch does what, then this kit won't help. |
| Has anyone installed this unit on the GL1500? All the reviews I see are for the GL1800. |
| One more broken bracket. Replaced it with chromed metal works / looks much better |
| The lights look great and are a real eye catcher. This was my first install so I took my time and had no real challenges other then make sure your placement is correct before pushing that "sticky tape home!" |
| They have changed the design on this product several times since I bought one! It just doesn't work,, brass tips kept coming off, couldn't get the device to even fit in the puncture! There are better repair devices out there! |