Contact Us
| Have seen it installed on my friend bike from long distance really …more visibility, extra hi level signal, easy to install and very nice looking……. Strongly recommended |
| HAD THESE A WHILE, YEA THEY LOOK GOOD-COULD HAVE BEEN A BIT LONGER THO, DOWN NEAR THE BOTTOM PORTION OF THE COVERS, YES THEY DO- BRIGHTEN UP THE HANDLE BAR AREA-ESPECIALLY WHEN YOU HAVE YOU BIKE DECKED OUT-ALREADY! THE STICKUM SEEMS TO BE DOING ITS JOB TOO, NO EXTRA TAPE WAS NEEDED-SO YEA THIS IS ANOTHER GOOD ONE FROM KURY----GO GET A PAIR LOL---!! |
| YES THEY ARE WORKING A ADVERTISED -NO SCUFFING OF THE KEY AREA OR DASH,HAD TO REMOVE THAT RING THAT WAS ON THERE THO,BECAUSE IT MADE THE FOB HANG TOO LOW-OTHER THAN THAT -A GOOD BUY- SO YEA GO AHEAD!!! |
| Placed it on my 2010 goldwing with no issues, Slipped on snuggly and tightened set screw which already had what appeared to be loctite or similiar material on the set screw. Havn't used on soft surfaces yet. |
| Inexpensive and so easy to install. Nice addition! |
| Just upgraded to this from a stock 1800 windshield. Love it, huge improvement from stock. Much less wind buffeting at high speeds, and waaaay quietier. Really, better than I had expected. I am 6'2", with a long torso, so I sit high. With the windshield fully lowered, its great for most riding. Put it all the way up and its like riding in a car! Quiet, smooth, I can now hear my stereo at high speeds, and I can still see over the top.I used to get neck strain from wind buffeting my helmet... no more! :) Just came back from a 800 mile highway trip and am totally happy! Highly recommended to tall guys! Putting the oem windshield up for sale now... :) |
| I bought these after reading countless reviews about height and leg length and any vibration from the engine. These are the best looking and easiest to install/adjust that I have seen. |
| I boutght this item hoping it would cover the holes left by removing the CB antenna, without the armrests. It does a perfect job and looks OEM (a little chrome doesn't hurt). |
| I've have two of these headsets and are satisfied with there overall performance EXCEPT for the 8-pin upper section cord that attaches to the headset. After a period of time the cords on both our helmets started separating below the reinforcement. I tried to strengthen them with stiff plastic strips and liquid rubber and probably got another years use out of them before one started shorting out. The replacements are about $25 for the cords which is pricey if you have to replace two of them every few years. These need to be redesigned. |
| I do my own work. Too expensive not to. But these lights are too much. I don't understand. I can't find anyone to help me wire. Save yourself the aggravation. Buy something else. P.S. Lights still not working! |
| WELL, I WAITED A MONTH BEFORE I REVIEWED THIS CHROME SHIFTER PEG COVER-CKING IT OUT & ALL-YES I FOLLOWED THE INSTUCTIONS & ALSO ADDED THE BLUE LIQUID LOCTITE TO KEEP THE SET SCREWS FROM BACKING OFF-YES ITS STILL ON & WORKS GREAT CKED IT EVERYDAY WHEN I RODE ALMOST EVERYDAY-THE KEY TO INSTALLING THIS ITEM IS NOT TO SHOVE IT ALL THE WAY ON THE PEG-JUST PUSH IT ENOUGH TO LINE UP WITH THE RUBBER SLEEVE THATS ALREADY ON THERE-THEN SCREW IN THE SET SCREWS INTO THE RUBBER SLEEVE(I USED THE LONG ONES)THIS WILL HELP KEEP THE CHROME COVER FROM COMING OFF OR SLIDING OFF-I NOW HAVE A BETTER FEEL FOR SHIFTING & A BEETER SIGHT TO SEE THE SHIFTER AS WELL- SO YEA GO GET ONE OR TWO--ITS ALL GOOD !!! AGAIN IT BRINGS THE BIKE/TRIKE OUT EVEN MORE, WHEN YOU GOT IT DECK OUT-YEAAAAA !!! |
| WELL I PURCHASED THIS COVER ABOUT 6 YEARS AGO-& I JUST NOTICE, I NEVER POSTED A REVIEW ON THIS COVER- ULTRAGUARD-WELL HERE IT IS-YEA A PRETTY GOOD COVER-THO IT NEEDS AN INSIDE LINER, I BELIEVE TO HELP PROTECT THE TRIKE-THE COVER NOW MAY HAVE A PROTECTIVE LINER- DON'T KNOW -THIS COVER IS STILL PRETTY GOOD- STILL USING IT NOW-THINKING ABOUT TRYING OUT THIS NEW COVER THO-CKING OUT THE LATEST REVIEWS-YEA I-ON THE SIDE QUARTERS OF MY TRIKE- SO YEA CK IT OUT ??? |