Contact Us
| Sooner or later, the time comes to all Goldwings when the front fork seals begin to leak. At about 70k, my left seals began to fail. Very inexpensive parts but the labor charges for replacing them is hundreds of dollars. So I figured with all of the fantastic reviews of the monotube progressive forks and since I was paying some big bucks to replace the fork seals why not improve the suspension at the same time since they're already there. Simply slip in the new tubes in place of the stock Honda ones. Well, the reviews here are correct. It's only about 3 miles to my home from the garage I have my bike serviced at and in that short ride I noticed a world of difference in the handling characteristics of the bike. Handling was much more crisp and tight -- more race tuned that loose, mushy steering. At first the feeling was very strange to my touch but as I got used to it a big smile came over me. Even did a little stopover at a park on the way home and used the parking lot for some slow speed maneuvers. Have since gone on a 100+ mile run two up and I can't recommend enough these tubes as a replacement to the factory standard ones, especially if you're replacing the fork seals. Handling is tight, bumps in the road are dampened and gone is the infamous 40 mph Goldwing wobble. As a further note, I also replaced the steering head bears with the All Balls bearing and the combo of the two made my bike feel and ride a whole lot better. |
| I must admit to being a doubter to any claims a windscreen advertiser makes but decided to get this while at Wing Ding this year as my OEM screen with 60K on it had seen better days. The airflow is so much smoother than the OEM. The shield is about an inch taller than OEM and in its lowest setting seems to trap water between the shield and the dash if it rains so I have it one click up. My OEM shield was kept at the 3rd click up. Overall, a nice shield that makes a noticeable difference. |
| On my second pair of these and I still like them a lot. The upgraded tread design is a nice improvement. I still take a pair of walking shoes with me when I ride and only use these on the bike but in a pinch they could work for walking boots as well if you really needed to. |
| The design is nice, the Velcro is a little bit difficult to use at times. But ones you figure out a system it’s not that bad. My only real complaint is that the rain cover works great, ( AS LONG AS YOU KEEP YOUR SPEED UNDER 65MPH ) No matter what speed you travel at “ ALWAYS SECURE THE RAIN COVER WITH IT’S SAFETY CLIP†It saved my cover from being road waste, on numerous occasions. If you’re only riding in a light drizzle for less than a couple hours you really don’t need it. The bag also holds far more weight wise, than you should carry. |
| I have bought all three my opinion not worth the money I put them on a Honda trike and I bought them for as trike. |
|
Installed these on a 2012 GoldWing. I can say, after running these for several thousand miles, that they are the "real deal". I couldn't believe the difference they made. Would definitely recommend them. Talley Bogalusa, La. |
| Great product!! I recently took a 1000 mile ride, staying in motels, and after riding I would clean up my bike and install this wonderful cover. Perfect fit and waterproof! easy one person install and remove, fits in the bag it comes in. One of my best purchases for sure!! Tim |
| Good fit with a nice factory appearance. Pretty much a plug-n-play installation on my '05. As others indicated, you have to drop the meter out of the back panel to install the lock retention clip. Be nice if that was mentioned in the instructions. Not a big deal, added 5 minutes to the 30-minute install. Radiator relief hose had to be slightly rerouted to accommodate gauge intrusion. Back-lighting is red. Would be sweeter if it was color-matched to the factory instrumentation. Still a nice addition to anyone's arsenal of gadgets. |
| I bought the LED fender accents and used this to finish off the front fender. What a way to draw your attention to the fender. This is a nice easy to install product, just take the time to line it up with the centre of your fender |
|
I have never had things just fit perfectly until now. The carpet is perfect. I also was wondering why the cut out in the top box carpet but now after installing, it for easy access to the USB port. Well done Wing Stuff. Quality product and a realistic price |
|
I put these on the bike and they feel great. They look good and finish off the handlebars. Easy to install. |
| These arrived today so I got some glue just in case the others were right. On a 2014 they fit tighter than the OEM. I need a screwdriver to get them back out. They finish off the chrome I have put on my handlebars |